Yes, I'm not at home right now but I am almost sure it can be mounted on the bottom of the crash bar.
Hey. If you know someone who is installing a Interchiller and needs a CWA400 with -12an male flare ends let me know. I am selling mine for a good price. Never used.
Hey. Do you remember how you connected the controller to your pump? I am getting a CWA200 pump to flow my coolant
The pump has main 12v/neg, and PWM +/-. It's 4 wires.
Thanks.
Efficiency in terms of what exactly? Most tests ive seen were with GM pd blowers. My application is different with centri, a2w and ice tank. I run pump at 75% at the track, IAT usually in the low 60deg range at 28psi of boost.
Brain freeze lol. I didn't realize you were running a Centri. Is it air to water? Without the added heat soaking from a PD, you would probably see 32 degrees. Ask Kirk how their kits work with a Centri?
I have no idea who Kirk is. Yes as stated I run a2w. 32deg would only be achievable at 100% exchanger efficiency, which is not possible. A2a intercooler produced 200deg iat at the stripe. Ambient at start, 200 at stripe. I'm good with low 60s haha.
Nice. Kirk is from FI Interchiller [email protected]. Email him and ask him the questions or concerns you have.
I don't have any questions, my setup is dialed. I asked about the testing to understand more about what you are referencing.
Kirk From FI is the one who discussed their extensive testing on their interchiller system.
