How to fit 305's upfront?

[Jonas-RR-GT]

Here is some pictures of my square set up. Velgen Classic 5 20 x 10.5 45 mm offset with Nitto 555 G2 305/30-20. Running an 8 mm spacer up front to clear the dust cap and little more room from the strut. I daily my car.

Sponsored

 

[Spykexx]

Here is some pictures of my square set up. Velgen Classic 5 20 x 10.5 45 mm offset with Nitto 555 G2 305/30-20. Running an 8 mm spacer up front to clear the dust cap and little more room from the strut. I daily my car.

[MENTION=18696]Jonas-RR-GT[/MENTION] Is this on the Steeda sport progressives? Looks good!

 

[Jonas-RR-GT]

[MENTION=18696]Jonas-RR-GT[/MENTION] Is this on the Steeda sport progressives? Looks good!

[MENTION=26348]Spykexx[/MENTION] Yes and thanks!

 

[Spykexx]

[MENTION=26348]Spykexx[/MENTION] Yes and thanks!

Very nice! One of the sets I'm looking at, and I'm running exact same tire.

 

[OKC S550]

I don't daily my 305's. but I run them squared on 19x11's et 50. No spacer in rear, 20mm spacer up front with -3* camber. Lowered on BMR Handling springs with Konis.

Which 20mm spacers are you using?

 

[Killspray]

Which 20mm spacers are you using?

http://m.ebay.com/itm/172388681506

2 for $38.99

And I'm running extended studs on the front.

 

[BigHo]

[MENTION=18696]Jonas-RR-GT[/MENTION], What allignment settings are you running all around?
Also is a 10.5 inch wheel better than 11 inch for fitting the 305's upfront?

 

[15gtRob]

After seeing [MENTION=18696]Jonas-RR-GT[/MENTION]'s setup I'm looking at a very similar setup with these wheels and same tires. Surge M114 20x10.5 5x4.5 45 with nitto 555 305/30/20. on BMR spo80. Anyone think there will be any fitment issues? Its a PP car.

Sponsored