HELP WITH CLUTCH NOISE

[DriedAir]

The higher pitch noise is when the clutch is just barely pushed in and the more rough metal(ish) noise is after I push it in more. This is my first time doing a clutch. If you guys have some info please let me know.

Sponsored

 

[LCK22GT]

I got a warning message on your link, so I didn’t open it. It sounds like a worn throw out bearing from your description.

 

[DriedAir]

I got a warning message on your link, so I didn’t open it. It sounds like a worn throw out bearing from your description.

Should be able to view it now. I just replaced the throw out bearing. I might not have bled it all the way.

 

[LCK22GT]

Some more experienced clutch repair guys here can give you tips on adjustments.

I found this video on noise with light pressure

 

[Zrussian13]

What type of clutch and tob did you install? It definitely sounds like a tob issue.

 

[DriedAir]

What type of clutch and tob did you install? It definitely sounds like a tob issue.

It's an oem tob and I did a vengeance stage 2. 23 spline. I have a mcleod line with a bleeder on the way now. I'll throw that in when I get it.

 

[Zrussian13]

It's an oem tob and I did a vengeance stage 2. 23 spline. I have a mcleod line with a bleeder on the way now. I'll throw that in when I get it.

Did you buy an oem tob for a 15-17 or a 18+? If you put a twin disc vengeance clutch in i believe you need to use the 18+ tob.

 

[ice445]

Did you buy an oem tob for a 15-17 or a 18+? If you put a twin disc vengeance clutch in i believe you need to use the 18+ tob.

Probably this or some other clearancing issue

 

[DriedAir]

Did you buy an oem tob for a 15-17 or a 18+? If you put a twin disc vengeance clutch in i believe you need to use the 18+ tob.

That makes sense since the 18+ are twin disk from factory. That didn't cross my mind I'm gonna probably buy an 18+ one then if the bleeder line don't do anything.

Sponsored