Someone hit the Stang and left the scene. I've fixed most of the damage but the driver's side headlamp is cracked and I'm to understand that there's a glue that dries clear and you can sand/polish it and will hardly show?
Not windshield, the headlight.
Youtube shows a guy doing four stages of sanding then two coats of clear coat. Did know if someone mastered this in a different way?
It sounds like he just wetsanded them then use 1000 grit to start then 1500 grit then 2000 grit and finish with 3000. You will have to buff before you paint or some of the sanding marks will show through the clear coat. It sounds like the guy on YouTube did a headlight correction before he sprayed the clear.