Some of it is just personal preference. I went with ARH because they offer a 2" primary option vs. only offering 1-7/8"Seen some posts advising to go ARH. Any reason why something like the Brenspeed package that included Kooks LTs wouldn't be a good way to go?
CobraCommander, you bought these L&M cams?Yeah, there simply aren't enough of these cars produced vs. the bajillion Coyote's that were produced and guys who are willing to spend the money to buy the cams, let alone pay for the labor to get them installed. It's actually not that terrible, but it needs to be done while you're doing OPG's, etc. when the front cover is off the car and you are messing with your timing chains, etc.
Add into the mix that L&M really had a difficult time getting a good supplier of billet cores to make these things and the economics just don't add up to put that kind of effort into making them en-masse.
I think the Comp Cams cams for Coyotes was like 50% of the cost of what I paid for my cams. Just the price of doing business if that's what you want to do.
Yeah, there simply aren't enough of these cars produced vs. the bajillion Coyote's that were produced and guys who are willing to spend the money to buy the cams, let alone pay for the labor to get them installed. It's actually not that terrible, but it needs to be done while you're doing OPG's, etc. when the front cover is off the car and you are messing with your timing chains, etc.
Add into the mix that L&M really had a difficult time getting a good supplier of billet cores to make these things and the economics just don't add up to put that kind of effort into making them en-masse.
I think the Comp Cams cams for Coyotes was like 50% of the cost of what I paid for my cams. Just the price of doing business if that's what you want to do.
Yes. They are currently installed in the car right now. Waiting for my car to be finished up and ready for tuning and I'll report what my car ends up doing. Currently finishing up installing a Fore Innovations Triple-Pump Return System on the car.CobraCommander, you bought these L&M cams?
Is car n/a?Yes. They are currently installed in the car right now. Waiting for my car to be finished up and ready for tuning and I'll report what my car ends up doing. Currently finishing up installing a Fore Innovations Triple-Pump Return System on the car.
Yes, it is currently N/A. Wanted to see what we could do with a "maxed out" combination before I ended up going to a twin-turbo setup.Is car n/a?
It will probably help, but not sure how much power exactly since all of this is pretty much un-tested territory for the moment. I should have my car going here within the next 2 weeks. Got base startup files from Lund yesterday.Ok, please let me know. I’m pondering purchasing some L&M cams. Would a ported intake manifold make even more sense with these cams? I see they have they have 2 types of cams?
Can't wait. Ill hold off on my purchase till then.It will probably help, but not sure how much power exactly since all of this is pretty much un-tested territory for the moment. I should have my car going here within the next 2 weeks. Got base startup files from Lund yesterday.
In regards to the cams, you'll want these:
https://lmengines.com/collections/g...b-any-n-a-or-forced-induction-br-full-tivct-b
Kooks and ARH are both very high quality. Can't go wrong with either.Seen some posts advising to go ARH. Any reason why something like the Brenspeed package that included Kooks LTs wouldn't be a good way to go?
Where are we on this set up?It will probably help, but not sure how much power exactly since all of this is pretty much un-tested territory for the moment. I should have my car going here within the next 2 weeks. Got base startup files from Lund yesterday.
In regards to the cams, you'll want these:
https://lmengines.com/collections/g...b-any-n-a-or-forced-induction-br-full-tivct-b
Zero point to porting a GT350 intake manifold as of now. Wait to see what heads and cams does to the personality of the engine. You don't want the engine to be way too peaky.Ok, please let me know. I’m pondering purchasing some L&M cams. Would a ported intake manifold make even more sense with these cams? I see they have they have 2 types of cams?
but you do recommend doing the cams?Zero point to porting a GT350 intake manifold as of now. Wait to see what heads and cams does to the personality of the engine. You don't want the engine to be way too peaky.
This is going to sound kinda smart ass but if you have to ask, then no. That is a deep deep rabbit hole with late Ford Modular engines.but you do recommend doing the cams?