kevinvan6000
Well-Known Member
- Thread starter
- #1
So I've started my header install on my 17 and it didn't take long to run into an issue. I'm trying to remove the nut on the passenger side cat, the one that you need to get at from the top of the engine bay. I'm using a combination of 6" to 10" extensions with a wobble extension at the end connected to a long 15mm socket. There is a bit of rust on the stud so it's being a bit stubborn, and I can't break it loose. I'm wondering if I need to replace my collection of extensions with a single long one as there seems to be a ton of flex with the multiple extensions. Just curious what other people have used.
Thanks
Kevin
Thanks
Kevin
Sponsored