Head Studs/Head gaskets etc\

[Boduke0220]

What Head Studs and Head gaskets is everyone running? after Street car takeover in July I am going to tear the top end of the motor off and do head gaskets, head studs, and L&M intake cams before I take on the Arkansas Mile. Any recommendations or articles to read before I jump in?

Sponsored

 

[Crackerjack17]

ARP studs and stock head gaskets. $300 for the studs and I think you can buy the head gaskets for around $14 each.

You could do the head cooling mod easy too when the heads are off.

https://www.tascaparts.com/auto-parts/2017/ford/mustang/gt-premium-trim/5-0l-v8-gas-engine/engine-cat/mounts-scat

 

[2-tone]

Arp studs and cometics here. If you go cometic make sure the oil feed hole is big enough to feed the cam phasers. I had to drill mine to a larger sized feed hole. This is only necessary if you are not locking the cams out. Buy the ford manual for the car. It's a big help.

 

[z06psi]

This is a project on the list after the lift is installed.

Sponsored