Front Splitter Clearence vs Z06 w/Z07

[Sunny_M3]

Hey there my friends! Does anyone know if the clearance of the Z06 splitter (with Z07 package) is lower or higher or than that of a Mustang GT350R?

Sponsored

 

[censport]

clearance will also depend on the distance from the front wheels to the front of the splitter. obviously a shorter distance from the wheels to the front of the car will get you a little more clearance when you are transitioning from flat to a steep driveway/street.

 

[Sunny_M3]

clearance will also depend on the distance from the front wheels to the front of the splitter. obviously a shorter distance from the wheels to the front of the car will get you a little more clearance when you are transitioning from flat to a steep driveway/street.

Ahhh yes, this is a great point, I need to figure that out too! I've asked this on the forum before, but I am trying to figure out how to park my 350R in my super narrow parking garage without scraping too much. Also, I don't want to experience scraping every single time I leave or come into the garage.

 

[chitlins37]

Ahhh yes, this is a great point, I need to figure that out too! I've asked this on the forum before, but I am trying to figure out how to park my 350R in my super narrow parking garage without scraping too much. Also, I don't want to experience scraping every single time I leave or come into the garage.

Did you try any of the suggestions from last time? If so how did they go?

http://www.mustang6g.com/forums/showthread.php?t=88777

 

[Sunny_M3]

Did you try any of the suggestions from last time? If so how did they go?

http://www.mustang6g.com/forums/showthread.php?t=88777

I checked out the washers and didn't want to drill holes into my splitter. Also, I haven't gotten the car delivered yet; as a result, I haven't tried the angle approach. My Z06 has the front splitter and it clears; as a result, I wanted to get a comparison before the car arrived.

 

[Etchhead]

I bought the splitter washers and haven't installed them- or had a need to. You might be pleasantly surprised with clearance. I sure have been!

 

[GT2344]

Don't know the measurements, but i can say for certain my 16 GT350 (non-R) scraped every time i pulled into my driveway. Didn't matter which angle I took. My 16 Z06/Z07, surprisingly, never did. I think someone previously mentioned that the front wheels were closer to front lip. Hope this helps.

Sponsored