Feedback On Viking Crusader Shocks?

[Stroked89coupe]

Those of you running the Viking Crusader shock how are you liking it at the strip? What setting, R&C, are you running and what was a good starting point for you? Also, What's your best 60ft?

Sponsored

 

[Lockdown18GT]

Those of you running the Viking Crusader shock how are you liking it at the strip? What setting, R&C, are you running and what was a good starting point for you? Also, What's your best 60ft?

+1

 

[awdtsi]

Interested as well...

 

[mmacoyote]

I have the crusaders pair with bmr drag springs. before that setup 1.7's once in a while high 1.6. since I've installed them 1.51-1.59 depending on tire pressure

on the street 3c 5r
at track 9c 12r

but still trying to get it dialed in running 3.55 a10 so 1-2 shift is real fast.. think I will have to switch to 3.15 soon.

 

[kcc0521]

I have the crusaders pair with bmr drag springs. before that setup 1.7's once in a while high 1.6. since I've installed them 1.51-1.59 depending on tire pressure

on the street 3c 5r
at track 9c 12r

but still trying to get it dialed in running 3.55 a10 so 1-2 shift is real fast.. think I will have to switch to 3.15 soon.

I would like to know this as well. I am currently in the high 1.3 to low 1.4 with all stock suspension other than cradle lock outs. How much power is you car making? What tires do you run?

 

[bluebeastsrt]

I would like to know this as well. I am currently in the high 1.3 to low 1.4 with all stock suspension other than cradle lock outs. How much power is you car making? What tires do you run?

Gawd damn son. Thats some racecar like sixty.

 

[kcc0521]

Gawd damn son. Thats some racecar like sixty.

Most the forced induction S550s on a stall and boost are mid to low 1.4s on stock suspension with good tires.

 

[mmacoyote]

I would like to know this as well. I am currently in the high 1.3 to low 1.4 with all stock suspension other than cradle lock outs. How much power is you car making? What tires do you run?

700rwhp I'm running a centri on bitch boost (3.6 pulley) can doesn't get off the line to well. full interior car. 17's up front. 17x10 in rear mt et street r 305

 

[kcc0521]

700rwhp I'm running a centri on bitch boost (3.6 pulley) can doesn't get off the line to well. full interior car. 17's up front. 17x10 in rear mt et street r 305

Could be the track prep or your burnout. MT tires don't like a long burnout especially in hot weather. What is your best 60ft? Do your data logs show the car is spinning?

 

[RoadCone]

I have the Warriors and they are not up to par with the power... I probably need to switch to Crusaders...

Sponsored