Falling on its face

[engineermike]

I see you are boosted,

Yes and that matters. My peak engine load is around 1.7. Stock is around 1.0, so I’m flowing 1.7x stock. If you force 1.7x more flow through the same hole the pressure required is 1.7^2= 2.9x the pressure. If you take my 15 psi measured and divide by 2.9 you get about 5 psi stock, which is the rule of thumb I stated earlier.

Sponsored

 

[Torinate]

How can I find my peak load? Is it a PID?

 

[engineermike]

How can I find my peak load? Is it a PID?

I can’t speak to your particular logging device but load is typically a pid.

 

[engineermike]

@Torinate load is on your log you posted.

 

[Torinate]

Ok. Using a Lund nGauge. I’m sure there is a load PID on there.

 

[Torinate]

@Torinate load is on your log you posted.

Lol. Go figure. I’ll have a look and see what I see.

 

[engineermike]

Looks like 1.68 at peak.

 

[Torinate]

Thanks! Heck, you know more about my car and logs than I do.

Much appreciated.

Sponsored