scottmoyer
Well-Known Member
- Joined
- Aug 24, 2017
- Threads
- 20
- Messages
- 226
- Reaction score
- 101
- Location
- Orlando, FL
- Vehicle(s)
- 2014 GT and 2016 GT
- Thread starter
- #31
Car is at the body shop. 2morrow mentioned Speedkore and I decided to go with their look on the grey carbon fiber car, but with black and red stripe. The black stripe will be the wide stripe and the red will be the smaller stripe. A local decal shop is coming up with a template so the stripes can be painted on.
Also, they sanded down to 320 grit to get the marks out. Even at 320, they said a few spots still remained. Good thing their taking it all the way down, primer, paint and lots of clear!!!
Below is the start of it all!!
The interior is black with red stitching, so I added some red paint to my shift ball. I think it will tie in nicely.
Also, they sanded down to 320 grit to get the marks out. Even at 320, they said a few spots still remained. Good thing their taking it all the way down, primer, paint and lots of clear!!!
Below is the start of it all!!
The interior is black with red stitching, so I added some red paint to my shift ball. I think it will tie in nicely.
Sponsored
Last edited: