Bit_the_Bullitt
Well-Known Member
Post pics when you get em!
Sponsored
Sponsored
Custom Bullitt Mats?
- Thread starter SD-Harley
- Start date
- Watchers 5
-
- Tags
- bullitt floor mats
Elp_jc
Well-Known Member
I never got a reply about the studs, since in the UK they use plugs. So not going to order until one of you confirms they fit our studs 
. And that the quality is good. I plan to use the fancier ones, by the way; worth the $15 extra IMO.
. And that the quality is good. I plan to use the fancier ones, by the way; worth the $15 extra IMO.
Last edited:
OP
OP
SD-Harley
Member
- Thread starter
- #19
I order the fancier ones, so we will see. It will take a while to get here. I looked at it this way, worst case I bought expensive rear mats in case the front ones don’t work outI never got a reply about the studs, since in the UK they use plugs. So not going to order until one of you confirms they fit our studs
Sponsored
Elp_jc
Well-Known Member
I just want confirmation the stud female brackets are correct. On the other hand, I could remove them from the OEM or rubber mats I have, but I shouldn't have to do that. Not sure they're designed to be removed; some of those things can only be removed if destroyed. Hopefully they'll have the correct parts, so don't have to worry about that . And has anybody complained to those folks about the stitching? They may not know about it, but I'd say they do .
Finally, the color doesn't seem to be even near to a match, but does it look good? Thx.
. And has anybody complained to those folks about the stitching? They may not know about it, but I'd say they do .Finally, the color doesn't seem to be even near to a match, but does it look good? Thx.
Bulutt
Well-Known Member
I think you will be ok with the studs as I am sure they do lhd mats for the rest of Europe. Colour is pretty good but photo colour seems to be difficult to get right. Stitching issue is probably being picky.
number 6
Well-Known Member
I received the mats today - LHD.
They fit perfect and snap in as the originals do.
They have a cap on top, verse the hole thru on original mat, so they look a little more finished from that stand point.
They are the exact same size as original mats.
And the holes are in the exact same place, so the mat sits in exactly the same as original mat.
The rears are cut around to fit perfect also, one fits left and one fits right.
The stitching looks fine to me, but I'm not anal about that sort of thing.
I ordered the more expensive ones.
I ordered Dark/British Racing Green on both stitching and Bullitt logo.
It's lighter then the stitching on the original mats, so it catches your eye when you open the door.
I might have wished for it to be a little darker green.
Overall I'm extremely happy, no regrets here.
I would have played $60 just for the rears.
The stitching looks brighter in the first two pics because the camera phones light was on full blast.
In normal light it doesn't look so neon.
In the last pic there's no artificial light source.
They fit perfect and snap in as the originals do.
They have a cap on top, verse the hole thru on original mat, so they look a little more finished from that stand point.
They are the exact same size as original mats.
And the holes are in the exact same place, so the mat sits in exactly the same as original mat.
The rears are cut around to fit perfect also, one fits left and one fits right.
The stitching looks fine to me, but I'm not anal about that sort of thing.
I ordered the more expensive ones.
I ordered Dark/British Racing Green on both stitching and Bullitt logo.
It's lighter then the stitching on the original mats, so it catches your eye when you open the door.
I might have wished for it to be a little darker green.
Overall I'm extremely happy, no regrets here.
I would have played $60 just for the rears.
The stitching looks brighter in the first two pics because the camera phones light was on full blast.
In normal light it doesn't look so neon.
In the last pic there's no artificial light source.
Sponsored
Elp_jc
Well-Known Member
Yeah, they'd have been nicer with a darker green, and a more 'anthracite' tone to match the factory carpet better. But for the price, they're a still great buy IMO. Now that I know they latch over the studs fine, just have one more question for you: Is the heel pad properly positioned? In other words, does your right heel rest over the pad? How about the left one when operating the clutch? That's basically the reason I'd be buying them (otherwise I just keep the originals), so I want to know if that's the case. Carpet mats lasts a lot longer with a proper heel pad. Thanks man.
number 6
Well-Known Member
Hi JC.. yes both heels rest within the padded area.
In the pics, my right foot is just resting on the accelerator pedal.
My left foot is resting with the clutch, and it's all the way out.
When I push in the clutch, my heel comes off the floor, so no worries there.
When on the dead pedal, it's also with in the padded area, because I just pivot my heel over to the left.
My shoe size is 10 1/2.
The green stitching looks somewhat neon here, that's because my camera phone was illuminating/reflecting the area.
In normal light it's not as obvious/offensive.. but a slight darker green would have been more perfect, IMO.
On the web site you can get Dark Green, but that sort of looks like blue??
But the mats are very cool with the Bullitt logo. And I would recommend them for the 70 Quid or so ($88 US.. includes shipping).
As I said, I almost paid that for just the rear mats, and these rear mats fit very well indeed.
In the pics, my right foot is just resting on the accelerator pedal.
My left foot is resting with the clutch, and it's all the way out.
When I push in the clutch, my heel comes off the floor, so no worries there.
When on the dead pedal, it's also with in the padded area, because I just pivot my heel over to the left.
My shoe size is 10 1/2.
The green stitching looks somewhat neon here, that's because my camera phone was illuminating/reflecting the area.
In normal light it's not as obvious/offensive.. but a slight darker green would have been more perfect, IMO.
On the web site you can get Dark Green, but that sort of looks like blue??
But the mats are very cool with the Bullitt logo. And I would recommend them for the 70 Quid or so ($88 US.. includes shipping).
As I said, I almost paid that for just the rear mats, and these rear mats fit very well indeed.
Elp_jc
Well-Known Member
Thank you very much for your help; greatly appreciated . I'm going to order them this weekend. The heel pad would be even better like an inch more forward, but it's still usable. Thanks again for your awesome help. I'll order them like they have it shown on their website, which is the trim in 'dark/british racing green', and the logo in 'dark green' (there's no dark/british racing green for the logo). The logo definitely looks lighter, but no other choice. It could be done in white, which would match the trunk emblem, but would look a bit weird, no? Now I'm undecided. Ha ha. So which trim color did you choose? Standard green? Looks that way, but even though it looks lighter than the website, it matches the Bullitt logo better, which is quite close. So no ideal combination. It's either like yours, with both greens about the same, but much lighter than the car. The trim in 'dark/british racing green', which matches the seat and car color better, but clashes with the Bullitt logo a little. Or 'dark/british racing green' trim with white logo. Hmmm. How would that look? Comments welcome.
. I'm going to order them this weekend. The heel pad would be even better like an inch more forward, but it's still usable. Thanks again for your awesome help. I'll order them like they have it shown on their website, which is the trim in 'dark/british racing green', and the logo in 'dark green' (there's no dark/british racing green for the logo). The logo definitely looks lighter, but no other choice. It could be done in white, which would match the trunk emblem, but would look a bit weird, no? Now I'm undecided. Ha ha. So which trim color did you choose? Standard green? Looks that way, but even though it looks lighter than the website, it matches the Bullitt logo better, which is quite close. So no ideal combination. It's either like yours, with both greens about the same, but much lighter than the car. The trim in 'dark/british racing green', which matches the seat and car color better, but clashes with the Bullitt logo a little. Or 'dark/british racing green' trim with white logo. Hmmm. How would that look? Comments welcome.
number 6
Well-Known Member
jc... I ordered Dark/British Racing Green on both stitching and Bullitt logo.
The Website gives you that option. And they do match.
Check out my earlier 3 pics showing the logo.
The Website gives you that option. And they do match.
Check out my earlier 3 pics showing the logo.
Elp_jc
Well-Known Member
Just checked, and they don't, brother. Only logo color is 'dark green'. And the trim green options are 'dark/british racing green', and 'standard green'. The website combination is dark green logo (the only green option), with 'dark/british racing green' trim. It definitely looks darker than the logo, so you probably got 'standard green', which seems to match the logo pretty good. White would look weird, and might not even be available as a Bullitt logo, so it'd have to be like the website. But thanks for the info anyway. Have a great weekend, gang.
Sponsored
