Bullitt wheels

[lockwood]

has anyone changed their Bullitt wheels? Have you any photos to share?

Sponsored

 

[el-guapin]

has anyone changed their Bullitt wheels? Have you any photos to share?

Look at the wheels on this thread!
https://www.mustang6g.com/forums/threads/voo-doo’s-2019-dhg-bullitt-um-changes.119326/

 

[Sam]

19 x 10's and 19 x 11's with 275/35's and 325/30's. At this point, all stock suspention

 

[chesster51]

19 x 10's and 19 x 11's with 275/35's and 325/30's. At this point, all stock suspention

Beautiful! I guess if you can afford a house like that you can certainly afford those new wheels and tires!

 

[Sam]

Actually, that is my neighbors house. All the yard back to the spruce tree is me though. Takes a really large mower to cut that... those wheels are from SVE and not terribly expensive. Even though the tires are lwider than stock I had a net 32 pound weight savings

 

[chesster51]

Actually, that is my neighbors house. All the yard back to the spruce tree is me though. Takes a really large mower to cut that... those wheels are from SVE and not terribly expensive. Even though the tires are lwider than stock I had a net 32 pound weight savings

Yes, that looks like a lot of mowing. I see you took the Mustang plates off the rockers, how are they attached? Been thinking about doing that too.

 

[Sam]

Mustang plates? Not sure what you are referring to. I did not remove anything like that from the car. Not sure of what you are calling the rockers. Location on the car?

 

[K3993]

19 x 10's and 19 x 11's with 275/35's and 325/30's. At this point, all stock suspention

Liking that ! Nice yard as well.

 

[chesster51]

Mustang plates? Not sure what you are referring to. I did not remove anything like that from the car. Not sure of what you are calling the rockers. Location on the car?

I bought the car used, so maybe they aren't factory and the previous owner put them on? Only had it a few days, still learning.

 

[chesster51]

Wow, I thought they came on the car. I see now they were added.

 

[Sam]

Yes, definitely an add on. Probably held on with double side tape. I would guess that you could heat them with a hot air gun and remove them then clean up the residue with a general purpose adhesive remover like this:

https://www.amazon.com/3M-General-P...prefix=general+pupose+adhesive,aps,183&sr=8-1

 

[Schwerin]

19 x 10's and 19 x 11's with 275/35's and 325/30's. At this point, all stock suspention

Did you need any spacers for the rear or front?

 

[Sam]

No spacer needed. Everything clears. 35 mm offset in front, 50 mm offset on the rears. With the 275 size front tire there is no trammeling as experienced on PP2 and GT350's with the wider front tires.

 

[Rev'n Step]

I had VMB5's left from my old car. I like the look.

 

[The Rooster]

19 x 10's and 19 x 11's with 275/35's and 325/30's. At this point, all stock suspention

where are those wheels from sam?

Sponsored