BMR SUSPENSION'S S550 Lowering Springs: STANCE PICS!

[CTH621]

Thanks to Kelly for helping out on a misbox issue with my springs. Super nice guy who takes the time to help his customers. Appreciate the support and the car handles great.

Dude your wheel and tire combo looks sick!

Jesus...

What rim and tire size you running?

Sent from my SM-N9200 using Tapatalk

Sponsored

 

[moddirtrcr]

Dude your wheel and tire combo looks sick!

Jesus...

What rim and tire size you running?

Sent from my SM-N9200 using Tapatalk

Velgen VMB5 Satin Silver wheels

Front 20x9 6.38 Backspace-- Offset 35mm-- Nitto NT05 275/35/20
Rear 20x10.5 Backspace-- 7.52 Offset 45mm-- Nitto NT05R 315/35/20

 

[rj67]

SP080 & CB005

Installed my SP080 springs and CB005 cradle lock out over the weekend. Install was pretty straight forward. Had to battle one of the sub frame bolts but it was well worth it! Most of the wheel hop is gone and no noticeable NHV. Ready for new wheels! Sorry for the crappy pic. Will get some better ones when I get it cleaned up.

 

[angermgmt14]

Got the 081/088 combo and CB005 installed this past Saturday. Huuuuuge thanks to Marcus (Terminated) and his Dad, for taking the time to do the install. Car looks and rides just how I want it. I only have this one picture for now. Will get more after I get my alignment done.

 

[BMR Tech]

YES! Looks badass anger!

Man, you guys are great. I wake up each morning anticipating seeing more BMR Springed S550's in here! And you don't disappoint!

 

[Stang67]

Sorry, apparently I missed your question.

We will know more, when we get to test the springs on EB and V6 models. At this time, we have only engineered 3 sets, all for the GT models.

We will test the springs on the lighter models, and if they do not meet our wants, needs, or expectations - then we will engineer new springs for the ighter weight models...

The rates on these new springs we are going to offer, I can tell you, would work well on the EB....but not sure how the car will sit with them..

What about convertibles? Have you put these on one. Did the weight impact drop. Any suggestions.

 

[Stang67]

Performance Pack Struts, BMR Performance Springs, Motorsport Tech Spacers 25mm front 23mm rear.
These springs handle way better than stock!

Did you have the 23mm spacers custom made? I didn't see this size as being available on Motorsport Tech's website.

Thanks

 

[Stang67]

What exactly do you have on here? Sorry if you posted elsewhere, just curious.

Thanks

 

[2morrow]

Just got mine hooked up! Thanks for the help Kelly. Also thank Dylan back at the office for me too.

 

[abuch91]

Did you have the 23mm spacers custom made? I didn't see this size as being available on Motorsport Tech's website.

Thanks

What exactly do you have on here? Sorry if you posted elsewhere, just curious.

Thanks

I got them through a group buy on the forums, but yes they were custom made someone figured out 25 in the front and 23 in the rear looks good for the stock PP wheel setup.

As far as suspension goes, I am running the spacers and the BMR SP080 performance springs. (Which are awesome, by the way~!)

 

[BMR Tech]

SP089 Front / SP088 Rear

 

[mrchicago66]

SP080 Performance Springs

Apologies for the crappy cellphone pics. Will pull out the DSLR soon...

I got the SP080 Performance Springs and think it came out great. Still waiting for alignment but I did get the camber bolts just in case. This is a base GT by the way.

 

[SWETRID]

SP089 will lower the front about 7/8-1 inch?

 

[Stage_3]

I got the SP080 Performance Springs and think it came out great. Still waiting for alignment but I did get the camber bolts just in case. This is a base GT by the way.

Man,....that looks really good!

 

[Red Turtle]

New pics after a wash this morning and Racemesh grill installed last week. SP080 Performance

Sponsored