Anything else with opg?

[OrangCrush]

Is there anything else needing to be upgraded when doing opg and crank sprocket?

Sponsored

 

[80FoxCoupe]

Boss tensioners is a good idea.

 

[LethalBlake]

We typically recommend a new crank bolt and waterpump o-ring as well. Its usually a little more necessary for higher mileage cars but would not hurt in any situation for peace of mind.

 

[80FoxCoupe]

We typically recommend a new crank bolt and waterpump o-ring as well. Its usually a little more necessary for higher mileage cars but would not hurt in any situation for peace of mind.

Water pumps don't last long on these cars too

 

[Roh92cp]

I did this as well.
http://www.modularmotorsportsracing.com/cart/index.php?main_page=product_info&products_id=864

 

[gstboy69]

Mileage of the car?

 

[sloride]

Water pumps don't last long on these cars too

Replaced my opg’s around 5k and it seemed evident my water pump was weeping. So I replaced it then. Thought that was BS

 

[Jobodizo]

Replaced my opg’s around 5k and it seemed evident my water pump was weeping. So I replaced it then. Thought that was BS

Same, although mine had about 35k on it at the time. I don't remember ever replacing one on a car pre-100k before...

 

[80FoxCoupe]

Mine lasted 29k miles. Upside is that the Ford pump isn't expensive and it's easy to swap out.

 

[OrangCrush]

I have 8k miles on my car. So I am going to get boss tensioners and arp crank bolt. Does ford sell the water pump o ring separate?

 

[gstboy69]

I have 8k miles on my car. So I am going to get boss tensioners and arp crank bolt. Does ford sell the water pump o ring separate?

My recommendation is use the stock crank bolt new.

Sponsored