Sponsored

Anyone have directions - remove center console 19GT

Hadelson

Well-Known Member
Joined
Jan 2, 2019
Threads
45
Messages
449
Reaction score
427
Location
Allentown, Pennsylvania
First Name
Hugo
Vehicle(s)
24 RTR Spec 3
Anyone have directions and can tell me where to find them on how to remove center console 19GT with 6 Speed.

Thanks
Sponsored

 

michail71

Well-Known Member
Joined
Apr 15, 2018
Threads
92
Messages
1,225
Reaction score
214
Location
Florida
Vehicle(s)
2018 GT 401a A10
I saw a few youtube videos on the process in the past when I had to do that partially. Anything from MY 2015 on up should work.
 

Elvis66

Banned
Banned
Banned
Joined
Sep 17, 2016
Threads
16
Messages
1,498
Reaction score
1,585
Location
High Desert California
First Name
Brandon
Vehicle(s)
2019 mustang GT ..2014 Camaro ..72 Chevelle ..67 LeMans..97 4runner..2001 tundra
It's pretty easy ..make sure you got a 10m and a 7 or 8m sockets can't quite remember exactly. preferably 1/4 inch drive set and extension..take out the rubber tray under the toggle switches ther will be two bolts .and the rubber mat inside the console so you get to the two nuts .then take off the two knee side panels left and right side ..few more bolts to take out ..from there your gonna want to carefully pop up your shifter bezel.remove that assembly you're going to need a small Phillips screwdriver and car going to be in neutral so you can get to the screws. From there you should be able to move the center console around remove the hard plastic piece that the rubber try was on.next undo the wire harness for the key fob and USB .. ambient lighting cup holders and 12 v power..on the 19 the shifter has no light to worry about disconnecting. Then pull the parking break up ..you should then be able to remove it.
 
OP
OP
Hadelson

Hadelson

Well-Known Member
Joined
Jan 2, 2019
Threads
45
Messages
449
Reaction score
427
Location
Allentown, Pennsylvania
First Name
Hugo
Vehicle(s)
24 RTR Spec 3
It's pretty easy ..make sure you got a 10m and a 7 or 8m sockets can't quite remember exactly. preferably 1/4 inch drive set and extension..take out the rubber tray under the toggle switches ther will be two bolts .and the rubber mat inside the console so you get to the two nuts .then take off the two knee side panels left and right side ..few more bolts to take out ..from there your gonna want to carefully pop up your shifter bezel.remove that assembly you're going to need a small Phillips screwdriver and car going to be in neutral so you can get to the screws. From there you should be able to move the center console around remove the hard plastic piece that the rubber try was on.next undo the wire harness for the key fob and USB .. ambient lighting cup holders and 12 v power..on the 19 the shifter has no light to worry about disconnecting. Then pull the parking break up ..you should then be able to remove it.

Thanks for the tips
Sponsored

 
 








Top