Aldo Welds TT Mid Mount making 1185 at 21.8lbs of boost!!

[jayman33]

Been working on Greg's car for a good bit here at Hypermotive. He originally ordered a Boost Works kit but after waiting a few months he gave Aldo a call. Kit was solid, anyone looking for a kit you wont be disappointed.

Mods:
Aldo Welds Mid Mount TT kit
TKM Sleeved Short Block/ Molnar rods, Diamond Pistons, Boss Crank, ARP throughout
Fore Innovations Triple Pump Fuel System for E85
Built 6R80/ Circle D Converter

Not a fancy built but works with Lund behind the scenes tuning for us, I will have to say its been such a pleasure working with Lund on all our High HP Remote tuning builds. Communication is key for us and they do not disappoint.

If you have any questions on custom builds just give us a shout at Hypermotive, while this is there we also have an Armageddon TT car, Paxton car and a couple Whipple cars getting build and tuned by our friends at Lund. Whatever it is, we can definitely get you dialed in.

This last pull was 1159 while the car was still hot.

Sponsored

 

[80FoxCoupe]

Nice!!!! Any pictures of the TT kit?

 

[greengoblin31]

wheres da vid?!?!!

 

[jayman33]

 

[jayman33]

a few pics

 

[D98gt]

Hard to beat the deal that Aldo offers on those kits. He isn't just slapping parts together and sending out packages, he cares about what he is putting out.

 

[cobra199711]

Looks awesome.. How can one get pricing on his kit for a 2019?

 

[2qwk4ya]

Been working on Greg's car for a good bit here at Hypermotive. He originally ordered a Boost Works kit but after waiting a few months he gave Aldo a call. Kit was solid, anyone looking for a kit you wont be disappointed.

Mods:
Aldo Welds Mid Mount TT kit
TKM Sleeved Short Block/ Molnar rods, Diamond Pistons, Boss Crank, ARP throughout
Fore Innovations Triple Pump Fuel System for E85
Built 6R80/ Circle D Converter

Not a fancy built but works with Lund behind the scenes tuning for us, I will have to say its been such a pleasure working with Lund on all our High HP Remote tuning builds. Communication is key for us and they do not disappoint.

If you have any questions on custom builds just give us a shout at Hypermotive, while this is there we also have an Armageddon TT car, Paxton car and a couple Whipple cars getting build and tuned by our friends at Lund. Whatever it is, we can definitely get you dialed in.

This last pull was 1159 while the car was still hot.

Nice!

What Turbos/size?

 

[Ponderthis]

bad ass! Any pics of the header design?

 

[D98gt]

0

Looks awesome.. How can one get pricing on his kit for a 2019?

I know his 19 midmount kits aren't priced bad.
He's real responsive to his Facebook page under Aldo Welds or
Https://aldowelds.com/contact-us.html or
832-243-4983.

 

[cobra199711]

0
I know his 19 midmount kits aren't priced bad.
He's real responsive to his Facebook page under Aldo Welds or
Https://aldowelds.com/contact-us.html or
832-243-4983.

Cool thanks email sent. I’m looking at this kit, Hellion and LPF.

 

[cobra199711]

Jayman, what’s a typical install run $ for a mid mount TT kit? Looks awesome

 

[jayman33]

Kits are priced around 8k which include modified Kooks headers, this kit has precision 6266 turbos with 45mm waste gates, Cobra installation is priced around the 1-1500 mark for installation of these kits and similar kits. Add 1k for OPG/ CS install with the parts included. So far I'm extremely pleased with this kit and the communication Aldo had with us when we had questions.

 

[Brostang]

Can you post pics of the franken-Kooks?

 

[jayman33]

Can you post pics of the franken-Kooks?

Never took pics of them for some reason.

Sponsored