305/35/20 Rubbing

[Fray_s550]

yeah whats your alignment, mine is like todds 20x11 +45 rear i'm running 305/30/20 which is less sidewall but if your rubbing on the inner rear. Can you you see what it's rubbing against as we have alot of space inside, people have run 12" rears.

attached is my last alignment ignore the caster its never been in spec and front camber is intentional

unrelated question, how did you install your towing hooks ? looks badass

Sponsored

 

[chrisgonzales]

unrelated question, how did you install your towing hooks ? looks badass

The tow hook is from dusold designs https://shopdusolddesigns.com/products/2015-mustang-tow-hook-kit

It comes with a brace bar that mounts to the back side of the crash bar, then the tow hook mounts to that, I did it with the bumper off, was installing other things, but it can be installed with the lower belly pan removed and the front end jacked/lifted.

Thanks

 

[notstok5.0]

315/35/20 with an ET 52, I run -1.8 degrees camber

 

[Todd15Fastback]

BMR drag springs and every part they sell for the IRS. BMR specs say close to Zero as I can get for camber. I'm at +0.3 and 0.4. I think the tech said something about he set it that way because the springs were new.

A drag race setup, you do want as close to 0 for camber. But running your wheel and tire setup on the street, you cannot run close to 0.

 

[livewire2003]

315/35/20 with an ET 52, I run -1.8 degrees camber

I need more pictures. I have the exact same wheels sitting at my house when I get back

 

[Kong76]

I have the same rears and offset but on a 10.5 wheel with plenty of room. Fat tire for a 10 inch wheel.

Sponsored