3.73 gears install in s fl

[[email protected]]

any recommendations?

Sponsored

 

[Nagare]

Saw a guy going by "David Piercey's Mustang Performance" mentioned on a Facebook group and supposed to be ~$250 (ring and pinion, not the whole housing).

Of course it isn't on our coast, looked like Tampa area.

 

[wildcatgoal]

Steeda can do it in Pompano Beach.

 

[[email protected]]

Steeda can do it in Pompano Beach.

thanks i sent tj a message asking for a price since hes helped me out before.

 

[Nagare]

They can, but that'd be a very pricey install from what I got from Rodney. At that point I'd make a little trip of it and go to Busch Gardens instead.

Ideally, I'd love to get it done for under $300 in labor but I feel like that'll be hard unless I get the whole housing and even that might be pushing it.

And in case you didn't have the parts, this should cover everything:
M-4204-M (differential - $151.62 @ Levittown)
M-4209-88373A (ring & pinion - $158.46 @ Levittown)
M-4851-M8A (auto pinion flange - $55.86 @ Levittown)

Just not sure on if you would need something like the Whipple Flare tool or anything to make sure it runs properly on the auto.

 

[[email protected]]

yeah 250 labor is hard to beat, have you seen any feedback on that installer?

 

[Nagare]

Nothing outside of the facebook page which is 9 reviews, 5 stars. A guy with a procharged 3.7 was supposed to get his done there, just asked if he finished it up and I'll let you know if I hear anything.

 

[Pongo23]

any recommendations?

MAK Performance in Hialeah; awesome guys. MUSTANG specialists. Hit up [MENTION=10868]AdrianMAK[/MENTION]

 

[AdrianMAK]

We would be more than happy to help you and get the swap done. However $300 in labor is not going to be even remotely possible. $300 in labor was pushing it for old school solid axle 8.8s when done correctly, where everything was in front of you.

I will offer some advice, "Buy Once, Cry Once", in differentials if you don't do it right the first time, not only are you paying the labor again, but you are buying new parts again.

 

[[email protected]]

We would be more than happy to help you and get the swap done. However $300 in labor is not going to be even remotely possible. $300 in labor was pushing it for old school solid axle 8.8s when done correctly, where everything was in front of you.

I will offer some advice, "Buy Once, Cry Once", in differentials if you don't do it right the first time, not only are you paying the labor again, but you are buying new parts again.

Yeah it does look like allot of work.

I'll pm you for a price.

Thanks

 

[Nagare]

Hey Adrian, could you shoot me a PM with a rough quote for the job based on doing it as a pumpkin swap vs the ring & pinion?

Thanks

 

[tj@steeda]

Yeah it does look like allot of work.

I'll pm you for a price.

Thanks

Did Rod get back to you?

I sent him your info - let me know.

Thank you,

TJ

 

[[email protected]]

Not here, I'll check my email folder.

Thanks

 

[EgoBoost]

Saw a guy going by "David Piercey's Mustang Performance" mentioned on a Facebook group and supposed to be ~$250 (ring and pinion, not the whole housing).

Of course it isn't on our coast, looked like Tampa area.

Dave has done my older mustangs in the past. Unfortunately, he was unable to correctly install my current car after 2 attempts. Profab Performance Plus got it perfect the first time.

 

[Nagare]

Is the current car a S550 or the Boss mentioned in your sig? Rough idea on the price?

Sponsored