Sold: Nevada 2018 Mustang GT 401A PP1 Magnaride Whipple 900whp Mach 1 Custom build $60k

[V8der]

Up for sale is my 2018 Mustang GT 401A PP1 Magride car. This car started as a $52k sticker fully optioned car minus Shaker sound system and was transformed into what you see now. This car was completely built by me in my personal garage over the last 4 years. This car has right about $70k in just OEM, aftermarket and performance parts on it. I used nothing but the best parts in the industry and no expense was spared. Car currently has 5,700 miles on it. It makes around 950whp on on a max effort setup but lives around the 800 whp mark most of the time. I also have a 91 tune with a 3.8 pulley swap and will make 722whp with that setup. Bottom end is stock besides OPG/crank sprocket. Car has been on its current hp setup for about 1k miles. This car is in absolute PRISTINE condition and the attention to detail is next level on this car. I pride myself on ultra clean work and this car was no exception. There's lots of mustang running around and its hard to make these cars stand out as something different so it was my goal to build something no one else had looks wise with the performance parts to back it up. This car drives like a total dream and you would never know it has as much HP as it does without steppin on the gas.

Some highlights:

Whipple stage 2 with 10 rib kit on E85. Fore/Deutchwerks fuel system. Full OEM Ford GT350R Brake/suspension conversion. Complete Steeda suspension upgrades. Transmission is a fully built 3 clutch increase 10R80 with a brand new front cover/valve body/thermal delete/Circle D converter/ PPE pan with Mishitmoto increased capacity cooler. Car has OEM Ford 2021 Mach 1 complete handling pack front end on it with underbelly aero and inner fenders. Rear bumper is all OEM Ford 2020 GT500 valance with underbelly Aero. Roll bar is a special order Watson racing Chromoly steel version that weights only 42 pounds. Interior is a custom 1 off set of Katzkin seat covers I designed and had made and installed with GT350R steering wheel/Watson racing seat delete and manual shift boot swap with custom White madness Auto shift knob . Signature Wheels SV502 in brushed Sahara Gold 18/20 drag pack setup with Pilot Sports and ET street R's. (700 miles on setup) So many goodies on this car its hard to explain them all. Check the parts list below and look at the pictures they speak for themselves.

Full parts list:

•3M front end paint protection film

•Full GT350R front/rear brake conversion kit

•Hawk Z28 front/rear low dust pads

•Whipple Gen 5 Stage 2 supercharger

•Whipple 10 Rib Race Belt Kit

•ATI 10 Rib Super Damper

•Kinetic Motorsport’s Crank Saver stud Kit

•Palm Beach Dyno tuned on E85 & 91

•NGauge w/ windshield mount

•ZPE Griptec 3.3 pulley (E85) 3.8 (91)

•Moroso black powder coated expansion tank

•Fore Innovations return fuel system

•Deutschwerks twin DW400 Billet fuel hat

•JN2NG full plug and play fuel pump harness

•Injector Dynamics ID1050X injectors

•Boundary Billet Oil Pump Gears/Crank sprocket

•Reische 170 degree thermostat

•Circle D converter

•McLeod GPZ 10R80 clutches

•Full built 3 clutch increase count 10R80 built by me.

•Richardson 10R80 Thermal Delete

•PPE Aluminum 10R80 trans pan

•Mishimoto upgraded trans cooler

•ARH 1-7/8 headers w/ cats

•CORSA extreme active exhaust

•QA1 Carbon fiber driveshaft

•Stifler’s driveshaft loop

•DSS 800hp half shafts

•GT500 rear wing with Gurney Flap

•Diode dynamics LED side marker/reverse/interior lights

•Gloss black painted mirror caps

•BMR IRS lockout

•Steeda vertical links

•Steeda lower control arms

•Steeda front/rear sway bars

•Steeda billet sway bar ends links

•Steeda Magnaride lowering springs

•Steeda braided brake lines

•Steeda jacking rails

•Steeda IRS alignment dowels

•Ford performance hood struts

*Ford performance deck lid with custom black/red Ford emblem

•JLT driver/passenger side oil separator

•Signature Wheels SV502 drag packs setup 18 ix11 bead lock /20 x10 front

•Michelin Pilot Sport 4S 285/35/20

*Mickey Thompson ET Street R 305/45/18 rear drag radials

•ARP front/back wheels studs

•i5 Autohaus GT500 side splitters

•Watson Racing Chromoly 4 point roll bar.

•Watson Racing rear seat delete

•Lloyd Mats 5.0 embroidered trunk mat

•Sparco strap trunk pull close

•H3R Halguard Halon Fire extinguisher

•TEK208 billet roll bar fire extinguisher mount

•Custom black leather/ black suede w/ red stitching Recaros seats covers by Katzkin

•GT350R steering wheel

•2020 GT500 Ford performance door sills

•Ford performance oil/boost center gauges

•Ford Performance dash plaque

•OEM 2020 GT500 rear diffuser/rear belly aero

•White Madness Garage Auto shift knob

•OEM Ford red stitched manual shift boot bezel

•Cervinis Cobra R Hood

•Matte black hood racing stripes

•2021 Mach 1 OEM front end swap with handling pack/ underbelly aero.

•Morimoto LED headlights

•Diode Dynamics LED GT350 sequential turn signals/DRL’s

•GT350 Aluminum fenders with OEM handling pack Mach 1 fender flares.

Title in hand. Car is "For Sale" not "On Sale". I Love this car and don't have to sell it at all but am thinking of buying a GT500 so in order for that to happen this has go to free up garage space.
Title in hand. Car is "For Sale" not "On Sale". I Love this car and don't have to sell it at all but am thinking of buying a GT500 so in order for that to happen this has go to free up garage space.
PM with any questions. Tons if videos and pictures of me building it on my IG @djericforbes under highlights reels.

$60,000 FIRM

Sponsored

 

[kz]

Very nice car.
Out of curiosity - what are " •Ford performance oil/boost center gauges " ?

 

[jweggy]

Absolutely stunning meticulous build! GLWS.

 

[Crackerjack17]

Ho-lee-chit. Omg that is the nicest mustang I've ever seen. I would keep that over a gt500. Wow.

 

[jpro]

I'm local to you and I'm in the market, but I'm looking for more of a stock car. That said, this car is stunning. A couple of questions:
1. If you were building this over the past 4 years, why don't I know you and why couldn't I come over to help?!?! LOL
2. What seats are those?

 

[V8der]

Very nice car.
Out of curiosity - what are " •Ford performance oil/boost center gauges " ?

They are basically ecoboost mustang gauges ford performance sells that allow 5.0 model cars to show boost in the factory guages that are above the center stack.

 

[V8der]

Hahaha thanks!

Seats are Factory Ford performance Recaros that I had custom upholstery made for by Katzkin and I redid them.

I'm local to you and I'm in the market, but I'm looking for more of a stock car. That said, this car is stunning. A couple of questions:
1. If you were building this over the past 4 years, why don't I know you and why couldn't I come over to help?!?! LOL
2. What seats are those?

 

[Mikey.5oh]

No way! This car was a beauty to see in person!

 

[V8der]

Bump

 

[WhinRR]

That is one of the nicest s550's I have seen and super fair price.... Would be hesitant with the power through stock engine but mods are tasteful and well thought out

 

[Kennysum1]

That is one of the nicest s550's I have seen and super fair price.... Would be hesitant with the power through stock engine but mods are tasteful and well thought out

Those are fine power levels for the stock block/rods and pistons. He did the OPGs etc.

Why on earth would you sell this beauty and buy a GT500???

 

[BrandoS550]

I remember reading your thread for the Mach 1 front end conversion which I think you was the first and only one so far, beside the replicas I see now days. If you don't get your asking price, will you do a part out on the car?

 

[jlchoutex]

I dont see a price listed?

 

[V8der]

I dont see a price listed?

$69k

 

[NGOT8R]

I sure would love to have that in my garage.

Sponsored