Djervin
Well-Known Member
- Thread starter
- #1
I posted this is the DIY section as well, but wanted to also try here. Does anyone know what it takes to remove the oil pan from a 2015 GT? Long story short- I did OPG's over the weekend and actually replaced the entire oil pump with the pump from Boundary. After taking apart my stock pump to look at the gears I realized the o-ring for the pick up tube was still attached the oil pump that was removed. So there is no o-ring on between the pick up tube and pump right now.
I'm thinking it will be easier to just drop the oil pan, remove the (2) bolts from the pick up tube, install the o-ring and reinstall the pan.
Any thought's or advise is appreciated.
I'm thinking it will be easier to just drop the oil pan, remove the (2) bolts from the pick up tube, install the o-ring and reinstall the pan.
Any thought's or advise is appreciated.
Sponsored