10R80 Slipping in 7th

[Evil_Ernie1]

They're supposed to be shipping first week of December! So next week

Yeah thats what they said but I would expect more like a few weeks LOL.....always get burned by these manufacturer's time frames

Sponsored

 

[Dusten]

Circle d has a converter but its not for sale yet

 

[olaosunt]

Hard to stay out of 7th with 3.55's lol. Right around 120 is when it goes to 7th

I have a PP with 3.55 ear and on the street I have done 6th gear pulls up to 130 mph@7100.
On dyno a 6th gear pull got up to 135@7400-7500z

I was getting slip in 6th and 7th but topping of the transmission fluid that was a quart low seems to have fixed it and I was able to make a 7th gear pull up to 170+@8000 rpm with no slip .

It made 830 SAE (whipple with 3.625 pulley/E85) at the wheels but the pump with BAP was starting to run out at about 7600.

 

[Rjames18]

I have a PP with 3.55 ear and on the street I have done 6th gear pulls up to 130 mph@7100.
On dyno a 6th gear pull got up to 135@7400-7500z

I was getting slip in 6th and 7th but topping of the transmission fluid that was a quart low seems to have fixed it and I was able to make a 7th gear pull up to 170+@8000 rpm with no slip .

It made 830 SAE (whipple with 3.625 pulley/E85) at the wheels but the pump with BAP was starting to run out at about 7600.

Awe I couldn't remember exactly when it went into 7th. Just knew it was way before the traps

Sponsored