1/4 Mile Fast List 2.0

[Jay-rod427]

N/A Steeda Q500 2019 GT 310a this is a Road Race set up. Just started on the project.weight coming soon,Auto 60ft 1.835 330 5.108 [email protected]. Then Suncoast Performance Converter. 60ft 1.627 330 4.850 [email protected] Not finished testing on the converter NA. Launched at 4k . If you are looking for a Converter NA or boosted Call Suncoast Performance use coupon #719.
want to see the car running @garanicolas on instagram

Please post a picture of the slip.

Sponsored

 

[Slowsuzy]

Please post a picture of the slip.

. Here you go before converter and after converter

 

[NastyPumpkin]

. Here you go before converter and after converter

This is not a 1/4 mile slip.

 

[Slowsuzy]

This is not a 1/4 mile slip.

No 1/8 mile. Is this the wrong post.

 

[Jay-rod427]

No 1/8 mile. Is this the wrong post.

1/8 mile is ok if you don't run 1/4. I'll get it updated shortly.

 

[Slowsuzy]

1/8 mile is ok if you don't run 1/4. I'll get it updated shortly.

Since the corona cant run out to 1/4 mile track . We are test and tuning at our local track and its 1/8 only. Trying to get 60ft and 330 #s to see what people are putting down. We think we can drop into 1.5s. More to come soon.

 

[JasinEdward]

2019 PP1 10 speed car w/Roush 2650, VMP tune, and 19 inch DR's.

 

[Trpcana18]

2018 PP1 6 speed, Race star/MT street R 305/45/18, lund e85 tune, mbrp catback, steeda solid trans mount insert

2600 DA, 90 degrees, 85% humidity, track temps 120+


Shooting for 11's on a better day weather wise..

 

[NastyPumpkin]

New best today! DA 400 - temp 59

9.736 ET

 

[Jay-rod427]

A lot of people not including rear gear ratio. It's not hard to figure out, and I know it helps guide a lot of other people works best on what combos.

 

[NastyPumpkin]

A lot of people not including rear gear ratio. It's not hard to figure out, and I know it helps guide a lot of other people works best on what combos.

Mine is still the stock pp1 3.55 gear.

 

[Jay-rod427]

Mine is still the stock pp1 3.55 gear.

yup already had yours shown from previous submission.

 

[qtrmiler2]

2018 pp1 bone stock 10sp 355 gears.Bmr cradle lock outs

 

[crcpdx]

18, 401a, pp1, 10r80. Whipple stage 2, pump gas, mak cat delete, PBD tune DA was 1125

 

[NO1CARES]

2017 gt PP M6 3.73, Vortech V3si 3.6 pulley, Tss CS/OPG, ARH Long tubes Magna Flow 3 in exhaust, pump e85 shoemaker tuned Stock driveline, Stock spings/struts, BMR rear suspension, 28x10x17 hoozier and 20x9 front wheel. 3800 pounds weight. Date; 5/25/2018

Update coming asap.

Sponsored