super charger

  1. Air Fuel Ratio bank 1 and 2 stuck at 14

    Hey guys so I currently received three o2 sensor codes and my afrs are stuck at 14. I have a 2016 mustang GT with a VMP Odin supercharger kit, LTH, full exhaust with no cats running J bungs to prevent check engine light. Tuned by Lund and have had no issues until the other day I noticed...
  2. Florida Roush supercharger

    Roush supercharger for 2015-2017 Mustang. Easy to install at home. Here is what’s included in this kit; - Roush/Ford Racing R2300 2.3L TVS Supercharger - Upgraded 82mm Supercharger Pulley. Yes 82 for more boost. - Air-to-Water Intercooler System - Full-Face Low Temperature Heat Exchanger with...
  3. Beefcake Racing has Superchargers IN STOCK!!!

    11-21 Mustang GT Vortech / Paxton and VMP Odin / Loki kits in stock at Beefcake Racing!!! With supply chain issues going on, we spent alot of cash upfront to make sure we had kits available for immediate shipping for you guys and gals!!! This Black Friday! No waiting on multiple kits for...
  4. Beefcake Special Supercharger Black Friday Sale! *No Code Needed

    $200 Off (11/20 - 11/29) & Qualifies for Supercharger Refund Our Beefcake Special sale kicks off today!! These kits are not your average tuner kit. We throw in injectors, a BAP and offer the option to pair it with a Lund tune. These kits have a built in savings of around $1400 plus we are...
  5. Rhode Island 15-17 Part out. Procharger stage 2.

    Sold the car. Willing to ship at buyer's expense. Procharger stage 2 waste gated.. 10k miles D1SC ID 1000 injectors JMS boost a pump Tial wastegate Big red BOV 4.5 pulley Updated MAF pipe with intercooler block off plate. If you don't want a wastegate system you can buy a block off plate and...
  6. Return to stock for Paxton 2200SL 2015 Mustang GT

    Hey guys, I will be pulling my Paxton 2200SL kit off my car before I trade it in. Absolutely I thing wrong with it, just going in a different direction and I haven’t found much information on what is required to return it back to stock Does anyone know where I step by step guide is located or...
  7. Illinois 2015 6SPD Built Motor Supercharged Mustang GT Premium Performance Pack

    This is a 2015 50th Anniversary Premium Built Motor Supercharged Mustang GT with over $30,000 of parts and labor invested. I bought this car with 1 owner and 14,000 miles on it completely stock. Since then It was supercharged with a Vortech V3si kit around 24,000 miles and had the motor built at...
  8. Texas car sold

    not available
  9. Nevada WTB 18+ supercharger

    I’m looking for a used supercharger kit for a 18+ 5.0. Hopefully can save a dime going this route. Preferably a Pro charger or whipple, but I’ll definitely look at anything that’s a good deal. Thanks!
  10. **PRICE DROP** 2015-2017 Procharger Stage II Kit (P1SC) $5,200 OBO, TULSA OK

    Selling a nearly complete Stage II procharger that includes everything minus the tune, tuner, coolant tank and thermostat housing. The whole kit includes: P1SC Head Unit (Satin Black) Stage II Intercooler DW1000 Injectors (good for E85) FuelMax BAP (Running it on E no problems) 2 Pulleys (4.75...
  11. imgonline-com-ua-Resize-yQ4gfj3giXkLRgI6.jpg

    imgonline-com-ua-Resize-yQ4gfj3giXkLRgI6.jpg

    mustang gt whipple supercharger
  12. Anyone running high flow cats with whipple?

    I read that some people melted their cats with a forced induction build, I'm currently running stainless power LTs with high flow CATs. Wondering if anyone on here can give me some piece of mind that its uncommon to melt high flow cats. Most of the people I saw with melted cats were on race...
  13. 2015-2017 mustang gt PROCHARGER stage 2 for sale

    Check out this ProCHARGER! 2015-2017 mustang gt. S550 coyote 5.0 stage 2 procharger complete set I'm selling for $3,300 on OfferUp. https://offerup.co/fs4cCCR0M9 These kits go for 7k plus . I’m also throwing a jms fuel MAXX ! These go for 600$ alone in the market
  14. GT 2015 GT Roush SC Parts

    Selling the car so took some parts off it. I have a VMP BAP. Had on for about 5k miles. JLT drivers side roush/vmp catch can. 67mm VMP twin throttle body. And a 75mm VMP pulley. Throttle body - $500+Shipping Pulley - $70+shipping BAP - $220 +shipping Catch can - $70+shipping
  15. 3.5-3.75” Pulley on P1X Procharger

    Can any of you members tell me from your knowledge what a pulley at 3.75 or 3.5” would put out on my car for boost? Procharger told me on the phone my 9psi is produced with the 4.0” pulley. I’m looking to hit 12psi so 3.75” sounds close but I wanted to see if any guys on here with 350’s could...
  16. GT500 blower on GT350

    Does anyone know if this will work on a ‘18 GT350? There’s a slight possibility that I might be able to get my hands on a GT500 blower for my 18 and i was wondering if this would work. The Gen 2 Voodoo shares a block with the new Predator motor (although mines NOT a gen 2) so i would imagine...
  17. Paxton 2200SL head unit with 6 rib 3.33 ,3.40, 3.6 pulleys

    I have a Paxton 2200SL (headunit only) fresh from Vortech rebuild. The blower is fresh from rebuild and was only installed to insure proper function. I’m asking $2k local pickup if you would like it shipped you pay shipping and I’ll send it as fast as you need me to. Blower is brand new and...
  18. Help winning backyard makeover so my funds can go to Mustang Mods!

    Throwing this out here in the off topic lounge. Local landscaping company is having a contest for a backyard makeover and we just removed our pool and would love to spend the money I am going to throw into my backyard towards a supercharger and other mods on my stang. Any of my mustang...
Top