check engine light

Car won’t start, the only way I can get it to start is if I do a bypass on the starter relay. When started, got some codes, also the car will not go into R or D.

Let me start off by saying hello my name is Raymond and I have a 2016 mustang GT. Ok so i am getting P0316 & P0300 code. I have looked all over and can’t seem to find a problem, I did rebuild my motor because I did have low compression and my problems didn’t go away so I am stumped on what to...

I spun a rod on my 2020 GT mt82. Not sure if it was me or the transmission but as soon as I shifted from 3rd to 4th it went to 2nd. Tires locked and it over rev. I pull out of 2nd and try to re engage it to 4th gear. As I was doing that I was also looking at my shifter. I pull straight down to...

Hello, I’m experiencing issues on my ecoboost mustang: P0303 Misfire with P0316, Misfire occurred first 1000revs. Coolant loss, but when it drops to min line, it stops losing. I ran engine on-demand test & get P1116 code ECT Sensor related. Car is stock, only K&N drop-in and exhaust after...

Hey guys another issue sadly so was driving the car check engine light came on and p0300 multiple engine misfires. I have new plugs in the car about a month old. I checked the plugs all looked fine and didn’t smell like gas so I don’t think I have a bad coil. I cleared the code and it came back...

Car has just over 6000 miles on it and the check engine light is on. I got it before a few weeks ago in the evening but it went away in the morning..? Last time I had it serviced even though it went away and the ford techs said everythings fine and now its back again…any idea what it could be...

Hopefully this will save time and a headache for those of you that get this problem. I started experiencing a lower RPM misfire which was most prominent off of idle to 3k rpm. I would get an intermittent CEL which would produce a P0300 or P0308 code (random misfire or Cyl 8 misfire). The...