BmacIL's Guard GT Build

BmacIL · Mar 1, 2018

Got one of the Cylindrical Race Gripper knobs from MGW! It feels fantastic and has a great OEM look to boot. The topper has the reverse on the wrong side but [MENTION=10681]MGW[/MENTION] will take care of that. I had the regular gripper knob before this but I like this one more. Great little upgrade and not very expensive either.

As expected, MGW customer service is top notch and I have a new topper on the way. The best!

Coyote Red · Mar 3, 2018

Koni's or Bilstein

As I follow the Guard build, I've just installed progressive springs on Coyote Red. The Koni's I had on my 14 Cyclone were awesome and I had OE springs, w/J&M camber plates. Now I have camber bolts, BMR and want to do struts & adj. shocks. The spring Koni sale should be soon. More pics of the guard, please.

BmacIL · Mar 3, 2018

I would go with Bilsteins for the springs that you have. Looks great! I'll get a few more pictures up.

BmacIL · Mar 10, 2018

After all this time, finally got jacking rails on the car today. BMR Red CJR002 ultra low profile. Awesome product [MENTION=9985]BMR Tech[/MENTION] :thumbsup:

. They sit just a couple mm below the pinch weld. I had a little bit of a confusing moment at first because I didn't realize they were handed and tried installing the passenger side on the driver's side :headbonk:. The lengths and hole spacing is different.

Brian V · Mar 10, 2018

BmacIL said:
After all this time, finally got jacking rails on the car today. BMR Red CJR002 ultra low profile. Awesome product [MENTION=9985]BMR Tech[/MENTION] . They sit just a couple mm below the pinch weld. I had a little bit of a confusing moment at first because I didn't realize they were handed and tried installing the passenger side on the driver's side :headbonk:. The lengths and hole spacing is different.

I made my own and the steel is at least 10 mm above the pinch weld . Which I prefer .. the biggest challenge was getting the lengths and the mounting holes aligned to perfection .. painted them Ford Red which came out real close to Race Red . $32.60 for the suspension front strut to spindle bolts and nuts , rear cross member to body bolts .

BmacIL · Mar 24, 2018

Powerstop Track Day pads went on today, and flushed the whole system with Castrol SRF fluid. Holy braking power!

StrongFord · Mar 26, 2018

BmacIL said:
Powerstop Track Day pads went on today, and flushed the whole system with Castrol SRF fluid. Holy braking power!

I have the street/track package linked below. I've only HPDE with the track pads once so far, but I like them too. They really grab. I like the Z26 street pads the kit came with too.

My kit came with solid rotors, which I like better than PowerStop's drilled/slotted. At first I had the drilled/slotted rotors with the Z23 pads (didn't like) and they moaned so I swapped out for this kit and glad I did. Personally I think the moan was the rotors.

https://www.rockauto.com/en/moreinfo.php?pk=8110432&cc=3307633&jsn=1

BmacIL · Mar 26, 2018

StrongFord said:
I have the street/track package linked below. I've only HPDE with the track pads once so far, but I like them too. They really grab. I like the Z26 street pads the kit came with too.

My kit came with solid rotors, which I like better than PowerStop's drilled/slotted. At first I had the drilled/slotted rotors with the Z23 pads (didn't like) and they moaned so I swapped out for this kit and glad I did. Personally I think the moan was the rotors.

https://www.rockauto.com/en/moreinfo.php?pk=8110432&cc=3307633&jsn=1

Good to know! So far I'm very impressed with their street manners too. A little bit of squeal on light brake application if cold but I've definitely heard worse. Once it actually warms up it should be better. Bedding these things in was an interesting adventure.

StrongFord · Mar 26, 2018

BmacIL said:
Good to know! So far I'm very impressed with their street manners too. A little bit of squeal on light brake application if cold but I've definitely heard worse. Once it actually warms up it should be better. Bedding these things in was an interesting adventure.

Track pads daily? You're a madman!

I drove with them for a few days when I first installed them and a day before and after HPDE. As long as no one jumps in the driver's seat and without knowing jams on the brakes, it's good. A little noise for sure.

Bedding them was the best part! Mexico industrial park here I come! Once bedded the Track and Z26 will interchange without bedding again, they use similar materials pad compounds.

BmacIL · Mar 26, 2018

StrongFord said:
Track pads daily? You're a madman! I drove with them for a few days when I first installed them and a day before and after HPDE. As long as no one jumps in the driver's seat and without knowing jams on the brakes, it's good. A little noise for sure.

Bedding them was the best part! Mexico industrial park here I come! Once bedded the Track and Z26 will interchange without bedding again, they use similar materials pad compounds.

Yep! I definitely will consider this if need be.

This car is going to be a 3 season daily from here on out, so I don't need to worry about cold weather performance so much.

BmacIL · Mar 30, 2018

Couldn't resist taking a picture when the sun hits it so right. :love:

0330181644~2_20180330173310102_20180330173501017.jpg

BmacIL · Mar 31, 2018

LX1 said:
Yeah, that's the problem with guard. Everyone things it's gray until the sun is out.

Totally worth it though. Love this color.

BmacIL · Apr 15, 2018

Added Velossa Tech Big Mouth Ram air in silver. I'll get a pic soon!

Nagare · Apr 15, 2018

Make it like that last pic you posted, I've never seen the color come through so well as that shot.

How much brake fluid did you need to flush the whole system? I'm assuming it is the same as what I've seen from previous years where they recommend to get 2L just to not worry.

BmacIL · Apr 15, 2018

Nagare said:
Make it like that last pic you posted, I've never seen the color come through so well as that shot.

How much brake fluid did you need to flush the whole system? I'm assuming it is the same as what I've seen from previous years where they recommend to get 2L just to not worry.

If you get a full liter it's just enough, but buying two is cheap insurance (unless you get Castrol SRF like me lol).

BmacIL's Guard GT Build

BmacIL

Enginerd

Coyote Red

Well-Known Member

BmacIL

Enginerd

BmacIL

Enginerd

Brian V

USA Retired

BmacIL

Enginerd

StrongFord

Well-Known Member

BmacIL

Enginerd

StrongFord

Well-Known Member

BmacIL

Enginerd

BmacIL

Enginerd

BmacIL

Enginerd

BmacIL

Enginerd

Nagare

Well-Known Member

BmacIL

Enginerd

Similar threads