Gents
I have a Borla SwitchFire for sale if anyone is interested ?.
I’m based in Europe so would probably work out cheaper for someone in Europe to buy because of shipping.
Paid 879€ and has only 400km on it. Willing to sell for 400€.
It’s the resonator delete version which bolts directly into...
Hi All
I have a 2020 Bullitt.
Already tried the H pipe and X pipe but I didn’t like the sound. I actually prefer the stock resonator.
I would like the exhaust just a little louder and wondered what the best Axel back would be with the stock resonator?.
I have been looking at the flow master...
Hi All
I have a 2020 Bullitt and noticed something while the car was idling.
if I press the brake, when I release the rpm’s fluctuate before settling down again.
I connected the Sctx4 scanner and when idling everything is perfect. Measured lambda is bang on 1.00. But as I pump the brakes the...
Hi all
I’ve made a number of threads about an issue with my 2020 Bullitt and the moment I think it’s resolved the problem returns.
so basically the car feels like it’s dragging, more engine noise and exhaust note sounds off.
Then suddenly another drive cycle and the car will run as smooth as...
Hi All
First and Foremost Happy new year.
So I have a 2020 Bullitt and some strange hesitation has started to happen and I’ve found other people with the same problem but no solution yet.
The Problem
So imagine I’m cruising in 5th at say 50-60mph and I take my foot off the gas. As I reapply...
Hi All
Would their be any known issues if I only lowered the back ?.
I really like the stance when the car looks like it’s sitting.
Car has magneride.
cheers
Hi
Getting mixed answers about removing the chrome trim on the Bullitt.
Some say it can pop straight off but others say you can’t remove the back part without removing the whole rear window?.
Please if someone could let me know if it’s possible to just pop of the chrome ?.
thanks
Hi All
Just wondered if anyone knows where I can get hold of some quarter side window louvers ( Eleanor style ) that are actually larger than the window ?.
what I mean is that the louver would sit on the body covering the trim and not fitting inside the window.
Can’t find them anywhere but I...
Hi
Just wondered if someone could pitch if this is normal.
Air control temp sensor temporarily drops to -17.77 degrees before going back to normal.
Been having some issues With driveability between start ups and not sure if this is normal.
Added pic is at idle and you can see the ACT min at...
Hi
Could the throttle cause an intermittent problem and not set an error code ?.
had this ongoing problem with my Bullitt where when starting it will be buttery smooth with a quiet engine and pulls hard.
suddenly the next time I start it runs like crap with louder engine noise clicking noise...
Hi All
Trying to get the best exhaust set up.
Don’t like loud I just prefer deep and smooth sounding.
stock was ok on the bullitt
H pipe was a bit too mashy loud
And the SwitchFire was a bit too high pitched.
im thinking of going Borla Touring for that low grumble but still louder than stock...
Hi
So the best way I can explain my exhaust is it sounds like a trumpet when accelerating.
I guess it could be like drone.
But whatever mode quiet or track it will just sound like a louder trumpet.
I have stock AE exhaust and a borla SwitchFire. Had the H pipe before and it did the same. Almost...
Hi All
I was wondering if you could help recommend a new axel back system for my 2020 bullitt.
currently have SwitchFire and stock active exhaust and I’m not really digging the sound.
im looking for I guess a more chambered muffler exhaust sound that’s not loud and. Not quiet.
Something like...
Hi
anyway the clutch can be adjusted ?.
have a lot of slop on the clutch.
imagine I’m riding the clutch in 1st in traffic it will clunk and jolt when pressing down on the clutch.
clutch is fine but just feels out of adjustment because it’s a bit Snatchy.
thanks
Hi
Does the bullitt have exhaust temp sensor probes for bank 1 and 2?.
I put a generic obd2 reader and bank 1 was reading about 500c and bank 2 was reading 5000c which is obviously wrong.
just wanted to know if we actually have these sensors in our cars. Maybe it’s the obd2 reader ?.
thanks...
On the Mach 1 which has the same engine, the grill has a hole that feeds cold air to the filter.
where is the cold fed to the filter on the Bullitt because it obviously has a different grill to the Mach 1.
thanks for your help
Hi
just bought some new spark plugs from steeda. NGK iridium.
What’s the spark gap required on the 2020 Bullitt ?.
it’s the euro 460hp version but I’m guessing that won’t make a difference?.
all stock except for a tune
Thanks for your help
Hi All
I have a 2020 Mustang Bullitt.
The engine hasn’t been running that well. It runs ok but feels a little sluggish, exhaust sounds off, louder engine noise and it stumble and jerks a bit on low rpm’s.
now when I do a KAM reset it will run perfectly again until it learns new trims etc and...
Hi Everyone
I have a 2020 mustang Bullitt and love it but I seem to have some mysterious intermittent problem with it.
when it’s running well it will pull hard sound deep and have plenty of torque.
however I could literally switch off the key and start it again and it will run ( I wouldn’t...