Sponsored

Search results

  1. exhaust

    What would be a good way to get a deeper sound exhaust on the eco. I bought it it had some flow master deletes on it I want something that is a little more quiet and maybe a little deeper sound.
  2. American Racing Headers From Leathal

    Has anyone used them. I am getting rid of my Texas Speed long tubes and switching to another set of headers. The shop that "fixed" my exhaust leaks did a piss poor job. I figured screw it ill start from scratch if I have to remove them and reinstall them anyways. So anyone use a set of...
  3. Wheel bearings

    So i replaced my passenger side wheel bearing on my 2015 mustang. I used a torque wrench and really had to work at making the thing click at 251 foot lbs. I hope i didnt over torque the thing. Its an old wrench and dont know if its calibrated. I have put about 75 miles highway at speeds of 80...
  4. 2015 Mustang Water Pump

    I have a 2015 Mustang GT. Slightly modified. Water pump jist failed. Coolant all over the engine bay. Checked oil cap not milky. Checked dipstick. Not milky. Car idled fine when i pulled in driveway. I noticed a smell, had steam. Coolant all over driveway. Car has 46,800 miles.
  5. Hellion Street Sleeper kit question

    What difference does the Turbo header options make when you get this kit? I been looking at the kit for some time now and just wanted to make sure I am not buying a bunch of stuff for my goal. Looking for 750 on 93 octane and maybe change over to e85 in the future. Any information is greatly...
  6. Max Jack Two Post Lift for S550

    Has anyone bought one or used one. If so did you like it. I have thought about buying one so I don't have to be on my back when I do things under the car. However, when I look at how high it raises the vehicles it seems like it would be very inconvenient. I am 5 foot 6 the lift only takes the...
  7. Trying to figure out a vibration issue on 2016 5.0 6 speed

    My buddy has a 2016 with full exhaust and long tubes. Driving down the road the car is smooth running up to about 80 mph. Then we get a little bit of vibration. Then it smooths out again after 90 to 100 mph and stays good all the way to 140+. We thought it would be RPM dependent as the...
  8. moving up north from down south

    I bought my two mustangs in Arkansas. I am moving to Illinois in February. Northern Illinois, specifically. Should I be concerned about my changing out my antifreeze and what not. I ask this because when I was in New Hampshire for a short time one of my coworkers had a car he bought down in...
  9. on3performance low mount kit.

    Anyone used one. I am on the site and literally flipping my credit card at the moment debating.
  10. does anyone know what is a good gt350 spoiler.

    I been wanting to buy a GT350 spoiler for a while. I have seen many different ones at every price point 100 bucks to 500 dollars. I don't want one thats going to flex and break. Been reading a lot of reviews about them. Anyone got suggestions. I don't want to spend more than I have to.
  11. at what point does a larger throttle body make a difference.

    I have heard so many conflicting stories about upgrading the throttle body but I can't seem to find a numbers answer.
  12. Mide pipe options

    I have a set of texas speed long tubes with off road midpipes. The mid pipes are damaged. What mid pipes can i replacethem wih to have a good fit.
  13. Arkansas Texas Speed Connecting Pipes

    I am looking to buy some cat-less Texas Speed Connecting pipes. I priced them at Texas speed a month ago for 140 bucks. They don't have them in stock no more. Local pick up preferred.
  14. Running car with open headers.

    I have a set of Texas Speed Long tubes, catless. I need to take my car to a shop but at the moment I do not have an exhaust on the car. Can I drive my car a couple of miles with open headers and not hurt nothing or am I risking my valves.
  15. Arkansas Want to buy rims and tires.

    looking for some performance pack wheels and tires or some 5 spoke rims and tires. 19 to 20 inches and looking for 9.5 to 10 inches wide. Will pick up and drive for the right deal. Surprise for the wife.
  16. ebay rims

    I hope I don't get laughed at. Anyone ever buy some ebay rims? What was your experience
  17. Anyone had an exhaust made

    I thought about having my local exhaust make me an exhaust instead of purchasing one. Any thoughts. Who has done this. Do you regret it? I have long tube headers, into a resonator delete, into some borla mufflers. Kind of getting tired of the sound and want to change it up a bit without spending...
  18. Speaker locations and sizes on a 2015 convertible

    I have a 2015 Ecoboost premium. The speakers and sound system seem kind of well, weak......Anyways, I was planning on replacing the OEM speakers with something better. So, can anyone help me out on what speakers I need for the doors, both upper and lower, rear speakers, and where is the location...
  19. 2015 Ecoboost

    I have a 2015 Ecoboost. Right now I am trying to get parts together Intercooler, charge pipe, down pipe, blow off valve, different exhaust. I figured I would go through Cob for the tuning. Seems to be what everyone else is doing. I was wondering what people are making as far as power goes. Also...
  20. Has anyone used BMR Suspension Motor Mount Brackets for 2015-2017 Ford Mustang V8

    BMR Suspension Motor Mount Brackets for 2015-2017 Ford Mustang V8, if so what is your experience with them. I have a set of long tubes and my mid pipe sits really close to my Transmission cross member on the passenger side. I was thinking of getting these thinking if I lower the motor a quarter...





Top