Search results

AEM V2 Water/Methanol Standard Controller Kit For Internal MAP With 35psi Max AEM 30-3015 Water/Methanol Injection Pump 200psi 250cc/min and 500 cc/min nozzles Devil's Own external check valve Nylon tubing Above for $225 shipped Bought the controller and pump to troubleshoot my existing system...

I read about issues with rotors with inverted cooling mentioned in several threads during during my brake related searches. I wasn't aware of potential issues when I took these pictures but I can see them clearly now. Creating a new thread to avoid highjacking others. EBPP/base GT front with...

I'm looking into attending a new member orientation day at a local track. It consists of two classroom sessions and two 20 minute track sessions with an instructor. I'm requesting recommendations for brakes. Below is my current setup: EB PP front and rear calipers, same as Base GT Front...

Time to get your mod game on! https://pages.ebay.com/promo/2018/0828/67245.html

Only 5%, but they do have decent prices to begin with.

I'm wondering if I need more dampening than what's provided by Pro-Action fixed dampers since the car feels bouncier with the latest suspension modes. To be fair, Steeda's guide recommends Pro-Action adjustable dampers for Ultralite Linear Springs and replacing many of the soft bushings with...

A special thanks to @Falk03 leading the way and answering my bzillion questions. His thread is at https://www.mustang6g.com/forums/threads/trying-to-add-blis-and-adaptive-cc-blis-is-installed.97591/. Note: I need to figure out a way to rotate the pictures... Parts Required (part numbers are...

Please delete.

One of my goals is to have a better flowing but relatively quiet exhaust to avoid unwanted attention. My current setup (Corsa 3" catted DP -> Borla Pro XS 3" inlet/dual 2.25" outlets -> pair of GT mufflers) met that goal. However, there are improvements that can be made, especially in the...

I currently have TUNE+ (AEM Stage 2) WMI the failsafe set up as shown by Adam: [ame=""] The way it's set up is that the TB wire going to the ECU is cut and connected to a failsafe solenoid included in the kit. Green wire from the WMI controller (applies ground when an error is detected) goes...

Saw a nice tribute after the Pat's Run today.

I call them the YOLO Methodology.

https://pages.ebay.com/promo/2018/0309/7020.html?_trkparms=%26clkid%3D2357648344275078901 From 8:00 AM to 8:00 PM PST today. Discount capped at $100. Time to go shopping!

My goal is to build a general-purpose car that can accelerate, brake, and handle better than an average car, basically a jack-of-all-trades daily driver. I’m more of an engineer than a racer, so my main interest is modding the car in small phases and feel the differences rather than hitting the...

Attached is my dyno run from today. It was on a Mustang dyno. The person running the dyno thought that my tune was on target, but noticed signs of spark blowout at around 5200 RPM. He estimated that this is costing me around 20 whp, and recommended that I check the plugs and gap them down to...

I ordered Steeda STB and SS braided brake hoses a few weeks ago and received a nice hand-written thank you card today. I've been modding cars for over a decade, and this is a first! Steeda definitely leveled up in my point of view (having solidly built made in the USA parts helps, too) and...

I recently completed my stealthy turbo back exhaust upgrade, which was done in phases. Phase 1, 3" Corsa catted downpipe: I chose the catted version to avoid stinky exhaust and for noise control. It still triggered intermittent CEL for rear O2 sensor, which was taken care with via tune...

I have a 2015 EB with PP. I'm not looking to lower the car, and PP springs seems to be up to task for DD duty with lightweight wheels and rotors, along with BMR cradle lockout kit, VLs, and Steeda STB. My only complaint is that rebound recovery on turns (e.g. hitting bridge expansion joints on...

Next upgrade on my list were the brakes. I initially mulled swapping the EB PP 4-piston calipers with either Baer Drag Race Brake kit or Brembo 6-piston calipers, but decided not to for the following reasons: Baer Drag Race Brake kit: It's about 60 pounds lighter (for both sides) than the...

What's a good place to by methanol (something like VP M1) in the Phoenix area , preferably in the East Valley? My goal is to make my own mix for the WMI system.