Search results

Hey gang, have 2 questions. Looking at the bottom of my car the other day, to see if the Steeda 'G' brace bar would stick down or not (it would, a little), noticed a long exhaust bolt on the left side of the car sticking straight down more than an inch, which could be dangerous if it hits...

Curious if I'm the only one, and why. From normal mode, I changed the steering to 'comfort', and exhaust to 'sport'. And every time I start the car, and select 'MyMode', its back to normal exhaust. The rest of the settings are correct, including comfort steering. Am I the only one? I tried...

There's a thread going on over the regular S550 forum here: https://www.mustang6g.com/forums/threads/bullitt-shift-knob-install-issue.130835/ . For reference, my car looks exactly like the OP's picture on post #1. Somebody posted a Bullitt ball on post #7, and #11, which have no gap. I'm afraid...

Hey gang, curious if your seats' ventilation work on the seatback, like they should. Mine don't. Both of my seats only work on the bottom cushion. The backs of both my wife and myself sweat due to no ventilation up there. The seat cushions are marginal, but at least they work. Curious if all...

With this COVID crap that is apparently going to linger until the end of days, I'm thinking of installing a hitch on my Bullitt, to take my bike places. I'd buy this 365-lb trailer...

Hey guys, sorry for the bother, but need your help with a reverse LED bulb issue I had. And you'll also learn something I'm sure you didn't know in the process. I posted this here because I suspect only cars with the new digital dash might have my issue. So here it goes. But first, something...

Hey gang, just noticed after tinting my windows that the rear seat cushion on my new 2019 Bullitt was tilted up a little behind the driver's seat. Tried pushing it down, but it wouldn't latch. So removed it to investigate. And found out the latch release handle was broken, and nowhere to be...

I've read about the infamous '2K rattle' many times here before, but never heard it... until today, so probably made it since mile 1. Had to leave the house early, meaning in quiet mode, so I heard the damn rattle. On my car, it's closer to 2,500 rpm than 2K, but I assume the others are the...

Hey gang, just want to know if what happened to my car is normal. After reconnecting the battery, due to a replacement from flooded-cell stock to an AGM from Advanced Auto (same 96R size), something weird happened. All Sync settings were retained, surprisingly (including radio presets). Same...

Hey gang, with less than 3 quarts in the tranny, and less than 2 in the Torsen, it should be quite cheap to replace the fluid in both. I've read in every instance that the diff fluid always comes out nasty, so with such an expensive differential (and with no filter), why not change it along with...

Don't know why I didn't find it before, but seems to be the only 96R AGM battery around: https://shop.advanceautoparts.com/p/autocraft-platinum-agm-battery-group-size-96r-590-cca-96r-agm/12102917-P?searchTerm=96R agm battery Same 590CCA rating and everything. Need to find out if I need to...

Okay gang, this is for the OCDs out there. Ha ha. First, let me tell you what I did today (pics 1 and 2), before my 'project'. It bothered me to have those hood cover studs, when there's none on our cars. Tried to unscrew them by force, but they didn't budge. Tried pulling them out, and no dice...

Hey gang, posted this on the Bullitt forum, but no takers. Forgot there must be WAY more 2019 non-Bullitt Mustangs with active exhaust than Bullitts, so wanted to repost it here; hope you don' t mind :D. Anyway, like the title says, I want to remove the valve connectors to insulate the exposed...

Hey gang, I want to insulate the ends of the exhaust valve connectors to avoid any future issue. Saw the TSB, and my car clears both the valve housing and sheetmetal, but not by much. Want to insulate the exposed wires up to the connector, but need to remove it to do a good job. Can't figure out...

Hey gang, noticed that on my new Bullitt since I test drove it for the first time. It already had 66 miles on the clock, and probably not easy miles. Even with the clutch fully depressed, I can hear and feel the clunk right when I'm pushing the shift lever to the left, right before going into...

Just curious if other Bullitts (or Mustangs) have the same 'hole' my car has. Not a big deal, but looks cheap. It's on the passenger side. The driver's side looks perfectly fine. In addition, the piece on the 3rd picture (passenger side) was waaaay lower than the hood. Looked like crap. Pushed...

Hey gang, I bought my Bullitt in part because the factory has a 1K-lb tow rating, and there was a hitch available from Curt. I was ready to order it today, but was told it wouldn't fit my Bullitt due to the active exhaust. MagneRide is an issue as well, but at least there's a way around that, by...

Hey gang, like many of you, I just can't live with the stupid yellow airbag decals on the visors, so removed the visors, and the decals successfully this weekend. But couldn't get past the adhesive left behind. Tried everything I'd normally do, although before, Goo Gone was all I needed. This...

Hey gang, would like to make my Bullitt full LED, meaning replacing the 2 dome lights (need instructions how to remove that little console, please), the glovebox light, the 2 rear side reflector markers, and the reverse light. I thinki, but feel free to add anything I missed :). Thank you...

My battery is not holding a charge well, but I knew that when car sat for over 8 months at dealer (it's always the same). Also saw that Ford put a crappy battery on our Bullitts (wet cell), so would like to buy an AGM instead... but I couldn't find any in 96R size. Why is our battery the same as...