What floor jacks do you guys use? (lowered 500's too)?

[DopamineQuest]

Need some ideas for a quality floor jack, and preferably one that would work on a lowered 500. Any advice would be appreciated!

Edit: Would also welcome Jack Stand recommendations!

Sponsored

 

[MAGS1]

I can get you pics when I get home, but I have a 3.5 ton Carlyle low profile jack from NAPA. Not sure on a lowered 500 but it fits under my brother in law’s C8. I have the matching 4 ton stands. Got the stands from my father in law who is a retired heavy equipment mechanic, so he went a little overboard on the load rating , but I appreciate it.

 

[DopamineQuest]

I can get you pics when I get home, but I have a 3.5 ton Carlyle low profile jack from NAPA. Not sure on a lowered 500 but it fits under my brother in law’s C8. I have the matching 4 ton stands. Got the stands from my father in law who is a retired heavy equipment mechanic, so he went a little overboard on the load rating , but I appreciate it.

Ty, I'll take a look!

 

[EFI]

Pittsburgh 3 ton aluminum racing jack and OTC 22 ton stands:

 

[glene]

yup….pittsburgh….cheap, safe and effective…harbour freight…..

 

[DonnieO]

Roll up on some boards to raise the car up.

 

[SheepDog]

Harbor Freight Daytona long reach has a starting lift height of 3 -1/3". Easily goes under most lowered cars, and in conjunction with jacking rails makes it very simple and easy. If your car is lower than this, it probably doesn't belong on public roads anyway

https://www.harborfreight.com/3-ton...al-floor-jack-with-rapid-pump-blue-56641.html

 

[MAGS1]

pubic roads

Got some furry highways out your way ?? j/k

 

[SheepDog]

Got some furry highways out your way ?? j/k

Fuck. Typing is hard.

 

[DonnieO]

Got some furry highways out your way ?? j/k

Must have gotten some in his eyes

 

[SheepDog]

I hate furry highways. Smooth and well maintained should be mandatory

 

[MAGS1]

Fuck. Typing is hard.

Sorry, I couldn’t resist.

Sorry @DopamineQuest for derailing a bit. Back on track with jacks and jack stands!

 

[DonnieO]

I hate furry highways. Smooth and well maintained should be mandatory

 

[skinnyb]

Harbor Freight Daytona long reach has a starting lift height of 3 -1/3". Easily goes under most lowered cars, and in conjunction with jacking rails makes it very simple and easy. If your car is lower than this, it probably doesn't belong on public roads anyway

https://www.harborfreight.com/3-ton...al-floor-jack-with-rapid-pump-blue-56641.html

I have this one. It works great.

 

[Inthehighdesert]

I’m on the harbor feight bamd wagon as well. These.

https://www.harborfreight.com/autom...-racing-floor-jack-with-rapid-pump-64543.html

Sponsored