the bumper cover is diff too right? glad someone tried it!
The bumper cover still lines up. It's just the gap from the windshield post / fender. Going to take some work put I'll make it work! In way to deep now to back out!the bumper cover is diff too right? glad someone tried it!
The only thing I havent found is how they secure the ball end to radiator support (inside round pockets)good deal, not too big of a mod if that's the only area that doesnt fit! did you source parts for the hood pins? mind sharing the pricing?
Here's what you get when you try to put a gt500 hood on a '19 gt350! Never knew the fenders were slightly different between the two. So unless you have a body guy or the skills yourself dont do it!
a bit salty! you'll be the 1st though i bet!The only thing I havent found is how they secure the ball end to radiator support (inside round pockets)
I'm fortunate enough to buy at bodyshop prices and have to get Bill's out to be 100% accurate
475ea. ball end 80ea nuts and have to buy 4 when you only need 2 675ea for hood locks themselves 1700 hood 875 rain tray 300 in gaskets
It's in the bodyshop now still work in progress at the moment. I'll definitely share pictures when done! Also repainting all the black on car to tuxedo black and putting real strips on it not that vinyl crap!Thanks for letting us know. Good information. How does it look on the car just curious? Any pictures
Yes the bumper cover is different but has same line across the top as the 350. It was a gamble when I started without physically seeing a 500 in person and going off limited pictures. Only part left to source is how the pin section is attached to radiator supportThe dimensions are different so I suspect the whole front end sheet metal is different