Turbo guard vortech/paxton

[D3M0N1C5.0]

They were sold out when I checked there website. 4inch

Check back in a week. I order two at a time because they’re a family owned business.

Sponsored

 

[watisthis]

Might try the turbo guard ultra on my Procharger

 

[robmustang201528]

Might try the turbo guard ultra on my Procharger

I have that but I'm scared to drive with it on all the time that's why I bought the filter but I'm having to cut the fan shroud. It's a pain in the ass. Turbo guard pre filter is sold out in a 4inch

 

[Rothgray]

K&N RU2510 fits without the need to trim.

 

[robmustang201528]

K&N RU2510 fits without the need to trim.

That's the one I have. It won't fit.

 

[robmustang201528]

That's the one I have. It won't fit.

Unless I need to keep cutting on the shroud I guess

 

[TXS550]

I dont have a pic, but mine is cut completely out of the way in front of the filter. Just bare radiator there, then I cut left and right some until it fit.I have to remove the support cover and take out the 2 radiator support screws to move the rad back an inch to fit the filter in place.

 

[robmustang201528]

I dont have a pic, but mine is cut completely out of the way in front of the filter. Just bare radiator there, then I cut left and right some until it fit.I have to remove the support cover and take out the 2 radiator support screws to move the rad back an inch to fit the filter in place.

I figured this was more involved then what I thought smdh. No issues with the shroud having a big hole in it?. Heating issues

 

[TXS550]

I figured this was more involved then what I thought smdh. No issues with the shroud having a big hole in it?. Heating issues

No. Not at all.

 

[Rothgray]

That's the one I have. It won't fit.

It fits on my vortech JT, no issue.

 

[robmustang201528]

It fits on my vortech JT, no issue.

You had to cut alot of the fan shroud?

 

[robmustang201528]

Can u send me picture of how close the filter is from the radiator

It fits on my vortech JT, no issue.

 

[Rothgray]

You had to cut alot of the fan shroud?

The shroud was cut for the original inlet that vortech provides. The vortech inlet sticks out a lot further than the filter.

The shroud was not cut in places where the filter is.

 

[robmustang201528]

The shroud was cut for the original inlet that vortech provides. The vortech inlet sticks out a lot further than the filter.

The shroud was not cut in places where the filter is.

 

[robmustang201528]

That's what I cut so far. I'm about to say fuck it Nd just put the turbo guard on

Sponsored