Enzo
Well-Known Member
- Thread starter
- #1
Hey guys, just doing a quick and simple write up regarding the radar hardwire into the 2018 Mirror with rain sensor.
This is super simple.
1) remove plastic covers, you can do so by hand. It’s held on by clips.
2) remove mirror, it requires a T-20 screw.
3). Locate the wires where the mirror plugs into it. On the left side of the connection is where the power is.
4) Locate the blue/black wire and plug your Black wire into it, locate the brown/yellow and plug your Red wire into it.
That’s all you need to do and it will power on and off with all the other accessories.
This is super simple.
1) remove plastic covers, you can do so by hand. It’s held on by clips.
2) remove mirror, it requires a T-20 screw.
3). Locate the wires where the mirror plugs into it. On the left side of the connection is where the power is.
4) Locate the blue/black wire and plug your Black wire into it, locate the brown/yellow and plug your Red wire into it.
That’s all you need to do and it will power on and off with all the other accessories.
Sponsored