The time has come for a legit 3 inch direct connect exhaust!!

[jayman33]

Super pumped to be working with American Racing Headers in offering a legit 3 inch direct connect header system to support more 3 inch catbacks!!

Of course, the catback we wanted to test this with.... Corsa!!

For any questions at all don't hesitate to ask!! These will be added to the site and we have a stocking order on the way!!

I'll let the pictures speak for themselves!!

Sponsored

 

[ifly680g]

Super pumped to be working with American Racing Headers in offering a legit 3 inch direct connect header system to support more 3 inch catbacks!!

Of course, the catback we wanted to test this with.... Corsa!!

For any questions at all don't hesitate to ask!! These will be added to the site and we have a stocking order on the way!!

I'll let the pictures speak for themselves!!

Will these work with Kooks to Corsa?

 

[jayman33]

Will these work with Kooks to Corsa?

These are for ARH headers and 3 inch direct connect pipes.

 

[Cascadia_302]

I bet this set-up sings a wicked sound, in for a video!!!

 

[ManBearPig]

How would a "performance connect" like this bolt up to a catback like the MBRP that tapers to 2.5" for the last couple inches? You just cut that tapered part off the catback? Then are the midpipes long enough to fit?

 

[Socalmustang]

I have Corsa, do we pricing on these yet?

 

[sicks550]

So the part we are focusing on here are the cat delete section correct? Because I have this setup and my cat delete pipes are short to work with the Arh catback and I cant really get any other setups without modifications

 

[Quiksilver15]

So the part we are focusing on here are the cat delete section correct? Because I have this setup and my cat delete pipes are short to work with the Arh catback and I cant really get any other setups without modifications

is your cat back 3" or 2.5"

 

[350sexZ]

Good to see these come out.

 

[sicks550]

Cat back is 3" and narrows to 2.5" on the axel back

 

[mustang_guy]

Or you could just buy the whole arh system. Full 3 inch system.
Problem solved!

 

[jayman33]

How would a "performance connect" like this bolt up to a catback like the MBRP that tapers to 2.5" for the last couple inches? You just cut that tapered part off the catback? Then are the midpipes long enough to fit?

Correct, you could also purchase a 3" OD slip fit (light the stock ones) to have them fit directly after cutting. We had these made longer so you could go with the full length from ARH or even trim them if need be.

 

[jayman33]

I have Corsa, do we pricing on these yet?

Pricing will be similar if not the same as the 1 7/8th with direct "factory connect" fittings.

 

[jayman33]

So the part we are focusing on here are the cat delete section correct? Because I have this setup and my cat delete pipes are short to work with the Arh catback and I cant really get any other setups without modifications

We are focusing on making a 3 inch system without having to cut off a "neck down" portion or having to go to the store to buy an extra 5-7 inches of piping.... while feasible, its annoying.

One key note as well. Companies like Corsa that offer the option to go full 3 inches or have the neck down adapter.... when you remove the adapter you are shortening the system by roughly 4.5 inches in length. After working with ARH and explaining the situation, we came up with something that would work with not only Corsa but other catbacks.

 

[sicks550]

[MENTION=16871]mustang_guy[/MENTION] sorry for the confusion. I currently have the full Arh off road system. 1-7/8 LT headers w/ h pipe and Arh pure thunder mufflers. It's a good system no doubting that but I wish they would have made it easier to run different combos. Now that hypermotive is working on this with Arh I'm just waiting for the buy button to pop up lol

Sponsored