Group opportunity for Motorsport Tech spacers

[Midnight_LMR]

Hello all, I have been in touch with the owner, Lenny, over at http://www.motorsport-tech.com/ and after a bit of info and some homework have worked out a great deal with him on a set of their top quality spacers for our S550s. They have been shipping out a TON of 25 mm Front/23 mm Rear combo's and have worked with people from this and other forums to dial in the stance perfectly, going back and forth with them for a couple weeks figuring the perfect fitment to get that perfect flush look we want. They also offer custom offsets as well. I know we have all been eye-balling and WAITING 1" spacers to come back on stock from our favorite sites but let me share with you some info that really caught my attention.

These are made out of real Alcoa 6061t6 forged aluminum, not the cheap china 6061 that everyone else uses. They also give you a lifetime warranty and every part they build is INSURED, which is something other companies don't offer. They even engrave your Invoice number on the backside of each part to keep track of what they built you! Plus let's not forget they are American made 'MERICA!! lol

These are hub AND wheel centric as well, as opposed to pretty much everyone else who is just hub centric so your mustang will be set up exactly like a factory set up.

They have offered us some great group incentives:

Basically RETAIL is $285 shipped to the USA for the full 4 spacer Combo

We need at least 10 guys to get on board for 25% off - so $213.75 shipped

11-15 guys on board for 30% off - so $199.50 shipped

16-20 Guys on board for $35% off - so $185.25 shipped

If we can get 21 or more people on board then its $171.00 shipped

*Canada shipping is $30* *International shipping is $50*

If you factor in that other ones go for around $170+ for a full set of four and the most popular are on back order till whenever, this is a pretty sweet deal especially considering they are insured, life-time warranty, hub AND wheel centric and can be made to order, I don't see any downsides.

Anyone who is interested please just leave your screen name below or in PM to me and I will add it to the list, once we get enough we can submit and they will get started. If not interested please be respectful and no negativity, I did this inquiry because I have seen multiple threads throughout the forums asking about spacers and decided to see if i could find a way around the OUT OF STOCK issues elsewhere and the owner was kind enough to work with me and the forum members

*Cutoff date has been established as Dec. 25th*

THIS GROUP BUY HAS CONCLUDED NO MORE ADD-ONS AS OF 12/28/15

GROUP LIST:
1. @Midnight_LMR ORDERED
2. @z06psi ORDERED
3. @American ORDERED
4. @moarhorsepower ORDERED
5. @15DIBGT ORDERED
6. @xmustangx missed out
7. @redline727 ORDERED
8. @ATTFighter ORDERED
9. @ThirtyThreePointThree missed out
10. @Xantom ORDERED
11. @JasonS1974 ORDERED
12. @FusionGT ORDERED
13. @transitmaster ORDERED
14. @Boilator ORDERED
15. @Flyfaster1 ORDERED
16. @Hoosierdaddy27 ORDERED
17. @Boosting Stangs missed out
18. @jkmskfk ORDERED
19. @Budnr22 missed out
20. @rabbit_eater ORDERED
21. @crazyd ORDERED
22. @Brad2016 ORDERED
23. @joey113 ORDERED
24. @montreal ponies ORDERED
25. [MENTION=17388]Privateer[/MENTION] ORDERED
26. [MENTION=16323]Lone Survivor[/MENTION] ORDERED
27. [MENTION=14445]C11EWM[/MENTION] ORDERED
28. [MENTION=11431]aussierob[/MENTION] ORDERED
29. [MENTION=11069]bmfa[/MENTION] missed out
30. [MENTION=11313]Tweezy7[/MENTION] ORDERED
31. [MENTION=13827]tcador[/MENTION] ORDERED
32. [MENTION=18030]RoadSlayer[/MENTION] ORDERED
33. [MENTION=14613]SteveS[/MENTION] ORDERED
34. [MENTION=11567]11GTCS[/MENTION] ORDERED
35. [MENTION=8733]MoZ[/MENTION] ORDERED
36. [MENTION=18173]c6red[/MENTION] missed out
37. [MENTION=16773]hedonest[/MENTION] ORDERED
38. [MENTION=19842]abuch91[/MENTION] ORDERED
39. [MENTION=17339]Filli_at[/MENTION] ORDERED
40. [MENTION=17808]BAdrosky[/MENTION] ORDERED

Sponsored

 

[z06psi]

So can we get a custom sized set at this price?

Count me in then.

 

[WhiplashGo]

So 25 mm Front/23 mm Rear combo will give us a flush look. Is this on a certain size rim & tire combos (OEM or Aftermarket). What about a flush stance using the OEM rims & tires for a regular GT with 18" rims, not lowered? Very interested but need more specific info before getting on list. Pics? Do OEM studs have to be cut?

 

[redline727]

Subscribed for more information. You have my interest

 

[American]

I'm in for 25/23!

 

[transitmaster]

Interested

 

[Gibbo205]

Hi there

1" is 25.4mm and even though this looks great I feel the rear actually sticks out beyond the bodywork by 2-3mm unless you dial in quite aggressive negative rear camber, around -1.8 to -2.2 which on a street driven car has a negative impact on handling. Ideal rear camber for a street driven car should be -1.5 to -1.75 in the rear with around -1.30 to -1.50 in the front.

As such I considered 20mm spacers, but unfortunately with PP wheels you would need to shave some of the lugs which would require proper grinding hardware and a lot of sparks generated potentially damaging your paintwork/glass and the cost of labour at a shop to do so.

So I looked for the option I can do in my driveway, that was of Eibach levels of quality or higher and required no cutting of the lugs as such I went with:

25F and 23R sized (mm) spacers, these are hubcentric and a direct bolt-on, the quality is superb and you can either get them in billet silver or billet black.

The quality and service from Lenny is superb, I am very happy with mine and I paid $260 so for less than $200 this really is a totally superb offer.

 

[moarhorsepower]

I'm in for it. Would like it better if we can get into the 16+ range but if we don't it's all good

 

[WhiplashGo]

Hi there

1" is 25.4mm and even though this looks great I feel the rear actually sticks out beyond the bodywork by 2-3mm unless you dial in quite aggressive negative rear camber, around -1.8 to -2.2 which on a street driven car has a negative impact on handling. Ideal rear camber for a street driven car should be -1.5 to -1.75 in the rear with around -1.30 to -1.50 in the front.

As such I considered 20mm spacers, but unfortunately with PP wheels you would need to shave some of the lugs which would require proper grinding hardware and a lot of sparks generated potentially damaging your paintwork/glass and the cost of labour at a shop to do so.

So I looked for the option I can do in my driveway, that was of Eibach levels of quality or higher and required no cutting of the lugs as such I went with:

25F and 23R sized (mm) spacers, these are hubcentric and a direct bolt-on, the quality is superb and you can either get them in billet silver or billet black.

The quality and service from Lenny is superb, I am very happy with mine and I paid $260 so for less than $200 this really is a totally superb offer.

Pics of your setup with spacers please.

 

[Gibbo205]

Pics of your setup with spacers please.

Car needs to arrive first. ;)

 

[RoadSlayer]

What is the recommended lb ft of torque per Lenny to bolt these on the hub?

 

[Midnight_LMR]

ok guys ( [MENTION=18030]RoadSlayer[/MENTION], [MENTION=17984]WhiplashGo[/MENTION], ) I will forward your questions to Lenny himself and thanks [MENTION=13598]Gibbo205[/MENTION] for the info, its because of you that I reached out to Lenny. [MENTION=13144]moarhorsepower[/MENTION] I'm with you the more we can get this out there the better the deal for everyone, I'm newly back to the mustang world, been running single turbo supra and GSXR's for the last 5-8 years, so I am only a member of this forum. If you guys know of or are apart of other forums then definitely link this out there or tell me about it. Again the more the merrier rings true here lol.

 

[z06psi]

ok guys ( [MENTION=18030]RoadSlayer[/MENTION], [MENTION=17984]WhiplashGo[/MENTION], ) I will forward your questions to Lenny himself and thanks [MENTION=13598]Gibbo205[/MENTION] for the info, its because of you that I reached out to Lenny. [MENTION=13144]moarhorsepower[/MENTION] I'm with you the more we can get this out there the better the deal for everyone, I'm newly back to the mustang world, been running single turbo supra and GSXR's for the last 5-8 years, so I am only a member of this forum. If you guys know of or are apart of other forums then definitely link this out there or tell me about it. Again the more the merrier rings true here lol.

What about the different sizes I asked about?

Sent from my SM-N910V using Tapatalk

 

[Midnight_LMR]

[MENTION=15779]z06psi[/MENTION] in the original message he said they would do custom sizing. We he gets back to me I will double check with him to be sure but I wouldn't expect any issues

 

[15DIBGT]

Im in for a set

Sponsored