Group opportunity for Motorsport Tech spacers

[GT Pony]

It fit fine on the one spacer for the front. The second was an issue.

If one spacer is different, then it does sound like the holes for the lug nuts in the spacer were not machined to the same diameter.

Sponsored

 

[Xantom]

Finally got them on, along with some other mods. It turned out really good I think. Need to clean the car but here's a couple images.

http://i.imgur.com/jCFWNnF.jpg

http://i.imgur.com/nXB5Tej.jpg

 

[Pnasty]

can someone please confirm these are the correct spacers, and 1'' I won't need to trim studs or anything, correct? thanks, I know all the info is in here but just want to do one more dummy check before I order.

https://coyoteaccessories.com/wheel-adapters/5450-5450-a14

 

[GT Pony]

can someone please confirm these are the correct spacers, and 1'' I won't need to trim studs or anything, correct? thanks, I know all the info is in here but just want to do one more dummy check before I order.

https://coyoteaccessories.com/wheel-adapters/5450-5450-a14

Clearly says they are 1" thick. You may only need to trim the stock lug studs if the spacers are much thinner than 1", so you should be fine with 1" spacers. They look pretty decent for $25 each. Report back with info if you get them.

 

[Pnasty]

Clearly says they are 1" thick. You may only need to trim the stock lug studs if the spacers are much thinner than 1", so you should be fine with 1" spacers. They look pretty decent for $25 each. Report back with info if you get them.

will do, theres a bunch of guys on here running these but ill report back with my personal experience. thanks!

 

[tcador]

Don't really have any before from today. Here is the result after though.

 

[marjen]

I just ordered some 1/4" Motorsport spacers for the rear and 3/4" bolt on spacers for the front. Will the 1/4" fit ok on the stock studs?

 

[Chaps2k2]

Sorry for digging this thread out, but are those still the go-to spacers or is there something "better"/comparable on the market by now?

 

[Boilator]

I still us mine and haven't had a single problem. I'm at 37k miles too.

Sponsored