Diode Dynamics SS3 - Mach 1 Fog Light Adapters (3D Printed)

[MACHtobers Very Own]

Argh I can't decide on beam pattern )=
This is for looks and could be turned on most of the time.

sport combo/driving
Or
Sport fog

?????

Sponsored

 

[Mach1NA]

Argh I can't decide on beam pattern )=
This is for looks and could be turned on most of the time.

sport combo/driving
Or
Sport fog

?????

Lol this is partly why I don't kit the adapters with fog lights.

Do you do a lot of night time driving? Canyon runs?

 

[MACHtobers Very Own]

Lol this is partly why I don't kit the adapters with fog lights.

Do you do a lot of night time driving? Canyon runs?

no and no. I just want the holes filled and a nice yellow light to work with the regular headlights.

 

[Mach1NA]

Just a heads up. For some reason, some of the yellow/amber lenses are on backorder. You can probably go with a kit that you will likely be happy with. And if your not satisfied, swap out the lens with a different pattern.

https://www.diodedynamics.com/yello...tRoCMzeGq82KgyWFjc7o7793uIYVQmwRoCJJkQAvD_BwE

 

[DonnieO]

Props for a nice design bro!

 

[Mach1NA]

Just a heads up, the SS3 fog lights are on sale through Diodedynamics.com for memorial day. Link below...

https://www.diodedynamics.com/ss3-sae-yellow-sport-led-pod-pair.html

 

[MACHtobers Very Own]

PURChased!!! We're getting closer!!!

 

[Rynoe]

I haven’t seen anyone post any photos yet so here we go! These fog light adapters are VERY high quality and I truly appreciate the engineering that went into them. They do not appear aftermarket at all and completes the car IMO. I decided on amber back lights to match the turn signals during the day and white to match the headlights at night.

The entire kit itself is quality driven by someone with a passion for this car and comparing to Ford Performance (racing, whatever) would be an insult. The instructions are clear and very well written. The harness itself should be worth the price of the kit.

Just something I wasn’t expecting was reinstalling the crash bar was a PAIN! Every car is different but for me I had to position it over the spacer and lower studs, loosely bolt the top first, THEN bolt the lower part down.

Altogether a 5/5 mod that can be done at home with jack stands. Props Mach1NA! I can’t imagine what all you have had to go through to develop this!

 

[MACHtobers Very Own]

love it!! im just waiting on a buddy with a lift to schedule some time with me on a sunday and its Hammer time!! I ended up with the amber fogs.

 

[Mach1NA]

@Rynoe, thanks for sharing your post and the positive feedback. I'm glad your happy with the kit and hope to see more folks share their experience. I'm sorry you had a hard time installing the spacer, but rest assured you have adequate clearance between the housing and the support bracket. It was an even bigger pain for me after I reinstalled my bumper the first time and found out it was making contact.

What housings did you end up going with? Did you go with any of the higher intensities like Pro or Max? I like how you decided to match the color of the lights.

 

[Rynoe]

@Rynoe, thanks for sharing your post and the positive feedback. I'm glad your happy with the kit and hope to see more folks share their experience. I'm sorry you had a hard time installing the spacer, but rest assured you have adequate clearance between the housing and the support bracket. It was an even bigger pain for me after I reinstalled my bumper the first time and found out it was making contact.

What housings did you end up going with? Did you go with any of the higher intensities like Pro or Max? I like how you decided to match the color of the lights.

Hey! Absolutely, and no worries about the crashbar/spacer I just wasn't expecting how hard it was to line all of the bolts/studs up. I think your instructions here were spot on and not critiquing them at all, it was just a one-off issue for me (not everything is built the same on the ford assembly line ).

I ordered your pattern housings that match the lower grille pattern. I was really torn and almost chose the textured housings but ultimately glad I went with the pattern. As for lights I went with the sports, they seemed like the right choice for fog lights in the city.

 

[Whitedevil95]

I might have missed this in all the posts on here, but how is everyone controlling the fogs?

Sponsored