ESS G3X 60-130 seems slow compared to everyone else's with same/similar mods.

[mejohn50]

There is a search box (crudely highlighted red below) in the channel selector. Just type those parameters in and see if they show up.

Sponsored

 

[Maximos_n]

There is a search box (crudely highlighted red below) in the channel selector. Just type those parameters in and see if they show up.

Typed in fuel this was all i got.

 

[mejohn50]

This is likely due to you having a Lund tune with a scrambled OS.

 

[Maximos_n]

This is likely due to you having a Lund tune with a scrambled OS.

Not sure what that means. So are the datalogs im sending you guys gonna be kinda useless?

 

[mejohn50]

Not sure what that means. So are the datalogs im sending you guys gonna be kinda useless?

The big name tuning shops “scramble” their operating system names. It prevents you from (easily) reading out their tune and copying it. It also means when you try data logging with something like HP Tuners you may run into issues with available logging parameters. This appears to be the case with your car.

 

[Maximos_n]

The big name tuning shops “scramble” their operating system names. It prevents you from (easily) reading out their tune and copying it. It also means when you try data logging with something like HP Tuners you may run into issues with available logging parameters. This appears to be the case with your car.

So where would you recommend i go from here?

 

[tdstuart]

The big name tuning shops “scramble” their operating system names. It prevents you from (easily) reading out their tune and copying it. It also means when you try data logging with something like HP Tuners you may run into issues with available logging parameters. This appears to be the case with your car.

Yep this is exactly how my Lund tune is although I would have figured Lund when using hptuners would have more things available

 

[tdstuart]

So where would you recommend i go from here?

You could ask them to send you a parameters list for vcm scanner. Just say your phone hasn’t been working right for datalogs can they send you a file so you can datalog on your laptop.

Hopefully their parameters list will have fuel pressure. If I’m not mistaken they can add in parameter ids that vcm scanner won’t automatically detect. If it doesn’t you could ask them if you should log fuel pressure to see if there is an issue.

Have they told you that from the logs they can tell you have a pressure issue or is it just the code? Sometimes you can look at lambda, commanded, and duty cycle to see if the car isn’t able to get the fuel it wants.

I’ll still look at your log when I get home and see if I can tell anything.

If you really want to ever fully log the Lund tunes you can get pcm tec but it’s like $200 for the software and $140 for the device if I remember correctly, might be a bit cheaper. Probably want to avoid this route if you can since no one likes spending more money haha

 

[SheepDog]

3.15 gears

This is your problem

 

[Maximos_n]

Its only been the code. I tried reading for codes again today and it gave me the same one but pending. CEL never came back on tho ever since i cleared the first one. I asked if they could check my datalog i sent them when i had another revision and they kinda brushed it off. Never gave me an answer.

 

[Maximos_n]

This is your problem

I was always told 3.15s were better for boost

 

[tdstuart]

I asked if they could check my datalog i sent them when i had another revision and they kinda brushed it off.

Sounds like Lund haha. I would stick it out with them for a while before you think of switching or anything.

I’ve tried a smaller tuner and Juggernaut and they were worse than Lund. I’m going to give Juggernaut a few more try’s and then I’m going to ask Beefcake for a refund if they can’t get the tune half decent, car doesn’t even shift where they want it to and it’s on like the 6th revision. I’ll have to compare there tune vs mine but I haven’t done any tuning to the performance side of it besides adjusting the vct for my aftermarket cams and raising the rev limit and I think it’s just as fast as theirs.

 

[tdstuart]

I was always told 3.15s were better for boost

Ya the 3.15 isn’t an issue with the 10 speed and boost. Most n/a guys will still run them.

 

[Maximos_n]

[/QUOTE]

Ya the 3.15 isn’t an issue with the 10 speed and boost. Most n/a guys will still run them.

Oh no i meant like faster

 

[tdstuart]

Oh no i meant like faster
[/QUOTE]
Not sure what you mean by this. What are you specifically referring to that I said? You can edit my quote to the part you are talking about

Sponsored