Anyone replace their muffler tips on the stock active exhaust system?

[Bman5150]

The only thing I don’t love about the stock active exhaust are the tips. They are a little too small for my liking. Are there any good replacement tip options out there?

Sponsored

 

[compprep]

20 pages here!
2018-2019 Active Exhaust tips | 2015+ S550 Mustang Forum (GT, EcoBoost, GT350, GT500, Bullitt, Mach 1) - Mustang6G.com

Plus this
Slip On Exhaust Tips for Active Valve | 2015+ S550 Mustang Forum (GT, EcoBoost, GT350, GT500, Bullitt, Mach 1) - Mustang6G.com

 

[DougS550]

The only thing I don’t love about the stock active exhaust are the tips. They are a little too small for my liking. Are there any good replacement tip options out there?

Same with me. I will read the links for options I would replace.

 

[Bman5150]

Appreciate the links. I read thru them and there are only two individuals who really followed thru and installed slip-on style tips that they seemed to get to work for them. I definitely do not like the ones from Australia-they stick out way too far for my taste. The black ones Tish used seem ok but I don’t want black.

Doesn’t really seem like there are many (any?) vendors that have a specific solution for the 2018+ GTs as far as replacement exhaust tips other than those two.
Hoping someone who found another solution sees this thread and posts/shares.

 

[DougS550]

Appreciate the links. I read thru them and there are only two individuals who really followed thru and installed slip-on style tips that they seemed to get to work for them. I definitely do not like the ones from Australia-they stick out way too far for my taste. The black ones Tish used seem ok but I don’t want black.

Doesn’t really seem like there are many (any?) vendors that have a specific solution for the 2018+ GTs as far as replacement exhaust tips other than those two.
Hoping someone who found another solution sees this thread and posts/shares.

I guess buy a nice.set of tips, take them to an exhaust shop and have them cut to length and welded on?

 

[PKs]

I guess buy a nice.set of tips, take them to an exhaust shop and have them cut to length and welded on?

Yes cut and weld is the only way to really get it right. The distance protruding, angle and seperation can all be dealt with. You can go to a maximum 4 inch only for the oem valance.

 

[Bman5150]

What diameter are the OEM tips for the active exhaust? 3”? What about the Mach One? I think the Mach One tips are perfect.
I suppose I could go outside and measure mine but it’s NASTY outside at the moment lol.

 

[DougS550]

Yes cut and weld is the only way to really get it right. The distance protruding, angle and seperation can all be dealt with. You can go to a maximum 4 inch only for the oem valance.

I think 4.each 4" tips look nice. Any larger and I feel would look out of place, kinda goofy looking.

Sponsored