Kachow
Well-Known Member
- Thread starter
- #16
Thank you. Going to try switching the retainer clips on each side and grease. Will update thread if that solves it. Thanks for the help Matt.The metal backing on the pads have some clearance to "float" inside the caliper. Every pad is a little different. Every time you apply the brakes the backing plates contact one side of the caliper
If you're stumped on the noise, you might try pulling the pads and greasing the the contact surfaces in the caliper to see if it helps. The fact it only makes noise when warm and an aluminum caliper has 3x the thermal expansion of steel backing plates (like if there's any gap it gets 3x bigger the hotter it gets) makes me think it's worth a shot.
Sponsored