What did you do to your S550 Mustang today?!

[1 old racer]

I do

Sponsored

 

[samd1351]

Sorry to hear about that. Sounds really frustrating.

Yeah. Had to drive home with 3 different sized tires. I do believe that's the first time I drove home at or below the speed limit ever.

 

[samd1351]

I do

Details please. What brand, amount? I'm going to have to pull all of the wheels off and apply.

 

[1 old racer]

Details please. What brand, amount? I'm going to have to pull all of the wheels off and apply.

Remove the wheel. Clean the hub and make sure it is smooth.. then apply a LIGHT layer around the hub and on each lug stud then reinstall the wheel. Repeat the process every time you remove the wheel and this will never happen again. My car does not see very much rain but the water is very hard and I wash the car a lit so the water will leave hard water deposit. This is why I do it.

 

[PKs]

Remove the wheel. Clean the hub and make sure it is smooth.. then apply a LIGHT layer around the hub and on each lug stud then reinstall the wheel. Repeat the process every time you remove the wheel and this will never happen again. My car does not see very much rain but the water is very hard and I wash the car a lit so the water will leave hard water deposit. This is why I do it.

Does this product create any run off stains.

 

[1 old racer]

i have black wheels and almost every time I get some on my hands and then on the wheels. I just wipe it off with a shop towel. Dont goop it on just a thin even coat. and before you reapply clean off the old stuff so wont get a build up.

 

[m3incorp]

Interesting. I've never had to give more than a tug left and right to get any wheel loose on my cars that are driven on a regular basis. But I sure have been in shops where I see they have to use a rubber hammer or something similar to get the wheels to become loose.

 

[samd1351]

Remove the wheel. Clean the hub and make sure it is smooth.. then apply a LIGHT layer around the hub and on each lug stud then reinstall the wheel. Repeat the process every time you remove the wheel and this will never happen again. My car does not see very much rain but the water is very hard and I wash the car a lit so the water will leave hard water deposit. This is why I do it.

Thanks for the info. I've never had this happen before.

 

[wireeater]

Got this (borla switchfire midpipe) today and installed it later in the evening. Did it with only the rear jacked up and on stands. Somewhat of a pain for a 1 person job but got it done and couldn't be happier. I put up sound samples on my IG with each active mode.

 

[PKs]

Got this (borla switchfire midpipe) today and installed it later in the evening. Did it with only the rear jacked up and on stands. Somewhat of a pain for a 1 person job but got it done and couldn't be happier. I put up sound samples on my IG with each active mode.

What is IG?

 

[wireeater]

What is IG?

 

[Modulom4]

What is IG?

IG is Instagram

 

[PKs]

Thanks and thanks Bill. I don't always get what the abbreviations stand for.

 

[ice445]

Thanks for the info. I've never had this happen before.

I use fluid film since nickel antiseize always makes a mess.

Sponsored