6R80 Gearing 2015 GT

[SolarFlare]

I love my 2c. No complaints besides probably costing me a bit of 60ft

Sponsored

 

[bluebeastsrt]

I've been 1.44 with 4.15s.
1.48? Is your car NA?

Not real sure what you were confused about. I ran a Paxton 2200 like it says in my sig. But you gotta read between the lines with most of my posts. I don’t proof read shit! I’ll just post the slip and everyone can figure it out on their own. But if you’ve been 1.44 on 4.15 gears. Don’t you kind of already know the answer to the question you asked in the first post?

 

[BMAGOO]

You gotta read between the lines with most of my posts. I don’t proof read shit! I’ll just post the slip and everyone can figure it out on their own. But if you’ve been 1.44 on 4.15 gears. Don’t you kind of already know the answer to the question you asked in the first post?

That’s s a sweet time slip !! Why’d you ditch the ‘15 for the ‘19 ? Was it for the 10 speed?
& do you plan on going FI on the ‘19 ?

 

[SolarFlare]

There’s much more to gearing than 60ft. Just cuz one guy out 60fted another doesn’t mean 3.15s are better

 

[bluebeastsrt]

That’s s a sweet time slip !! Why’d you ditch the ‘15 for the ‘19 ? Was it for the 10 speed?
& do you plan on going FI on the ‘19 ?

Thanks. I got rid of the 15 because of a couple issues I was having. The first and most important issue is I developed a tick after a high speed run. A buddybet me the car couldn’t do 200+ and like Jackass. I wanted to prove him wrong.And secondly, I live in New Jersey and it’s a motherf#$ker trying to get a modded car inspected. Not sure if I’m going to mod the 19 or not with all the EPA crap that’s been going on lately

 

[Leonidas514]

Like you I don't proof read because I am usually busy, my car has 3.15s. Never said I was confused but I wouldn't change to your setup to run slower 60ft times with the 3.55s.

 

[SolarFlare]

And again.....60ft is only a small piece of the pie. And 60ft isn’t only based on gearing. Alignment, tire life, track prep, track temp, tire temp, tune, power, converter all play a roll. 80foxcoupe has already proved that switching up to a steeper gear increases your chances to go faster, if the rest of the variables are good.

 

[bluebeastsrt]

Cool chad. I guess we’re done with this thread then.

 

[bluebeastsrt]

And again.....60ft is only a small piece of the pie. And 60ft isn’t only based on gearing, alignment, tire life, track prep, track temp, tire temp, tune, power, converter. 80foxcoupe has already proved that switching up to a steeper gear increases your chances to go faster, if the rest of the variables are good.

Does it not feel like you’re pulling teeth in this section at times?

 

[SolarFlare]

Does it not feel like you’re pulling teeth in this section at times?

indeed

 

[Jackson1320]

Thats about as much as i feel comfortable pushing my MMR 1000 short block.

I would not feel comfortable pushing a MMR short block to stock horse power level

 

[SolarFlare]

Me personally....id spend the next 5-6 years relying on stock take off or new stock gen 2 shortblocks then fully built stuff from said company. They just don’t have a good rep going back to new edge days.

 

[WildHorse]

3.73 here, 1.26 60ft, 1000 plus hp. What gear you run????

Midnight performance made 1030 & went 7.8's with a 3.15.

 

[80FoxCoupe]

Midnight performance made 1030 & went 7.8's with a 3.15.

What did your car do?

 

[80FoxCoupe]

Midnight performance made 1030 & went 7.8's with a 3.15.

Please understand the OP is running a 6r80 and a centri blower. Not a fucking 10r80 and TT or whipple or whatever the fuck they run.

Sponsored