Newest Parts From J&M Products / Hotpart.com - Front & Rear Stainless Steel Brake Hose Kits

[Hotpart.com]

Fits: 2015-2020 Ford Mustang GT, GT Performance Pack, & GT350R

J&M Products direct fit D.O.T. certified PTFE lined brake hoses. These brake hose assemblies use true OEM style direct replacement non-universal fittings to achieve proper factory hose routing and fitment. Expansion of stock rubber hoses causes a spongy brake pedal feel and loss of initial braking force. Installation of our PTFE-lined stainless steel hose assemblies will give your car a firmer pedal, quicker braking response, and easier brake modulation. Hoses are tested to 3000 psi to guarantee a leak free hose assembly. Best of all these are made by J&M Products right here in the USA.

Stainless Steel Features and Benefits:

• Direct OEM Fit each fitting is of OE design so NO adapters are necessary.
• No volumetric expansion (hose swelling) for powerful braking and amazing ‘feel’
• Suitable for all applications including extreme racing.
• Exceeds the latest DOT standards backed up by independent laboratory reports.
• Trivalent zinc plating exceeds DOT salt spray test.
• Design allows high temperature operation and longer life.
• Every hose is pressure tested to 3000 psi. (207 Bar)
• Quicker brake response. Better brake modulation.
• Every hose is stamped with U.S. DOT registered number.
• Outer protective covering.

Fits: 2015, 2016, 2017, 2018, 2019, 2020 Ford Mustang GT, GT Performance Pack, & GT350R View attachment 413242

Sponsored

 

[Hotpart.com]

Win a free set of these J&M Products D.O.T legal OEM fit Stainless Braided PTFE lined brake hose kit by following the link below.

https://www.mustang6g.com/forums/th...-rear-stainless-steel-brake-hose-kits.134334/

 

[JohnDoe]

Will the 22" rear lines fit the front?

 

[Hotpart.com]

No they won't fit. Why do you want to use them in the front?

 

[JohnDoe]

No they won't fit. Why do you want to use them in the front?

Need more slack for 5” extended struts which gives it a 3” lift

https://www.universalcarlifts.com/p...-kit-with-struts-shocks-fit-22-24-26-28-rims/

so I can do this

 

[Hotpart.com]

We make these in house so I don't see a reason we couldn't make a custom set for you. You would need to call us to place the order and of course it would be your responsibility to check all clearances.

 

[JohnDoe]

We make these in house so I don't see a reason we couldn't make a custom set for you. You would need to call us to place the order and of course it would be your responsibility to check all clearances.

This makes me so excited. Can you make them for the Ecoboost or are they all the same?

 

[Hotpart.com]

The 320mm rotors use a different brake hose but if you have the 352mm rotors we are showing that they are the same hose.

 

[JohnDoe]

The 320mm rotors use a different brake hose but if you have the 352mm rotors we are showing that they are the same hose.

I have the 2015 Ecoboost performance pack which is 13.9” front and 13” rear. Will that be an issue when I call to order?

 

[Tank]

The non R GT350 isn’t listed in the product fitment. Any reason?

 

[Hotpart.com]

I have the 2015 Ecoboost performance pack which is 13.9” front and 13” rear. Will that be an issue when I call to order?

No those are the 352mm rotors so you are good to go.

 

[Hotpart.com]

The non R GT350 isn’t listed in the product fitment. Any reason?

The GT350 uses a different caliper side fitting to help the hose clear the sensor for the MagneRide.

 

[Tank]

The GT350 uses a different caliper side fitting to help the hose clear the sensor for the MagneRide.

Huh, thanks for the quick response.
This is a difference I hadn’t known about.

Sponsored