Oxford White GT

[Manders Mustang]

would be very interested in where that front end is from as that looks like the most accurate 350 replica.

Wonder if it's the Mr Body Kit one but that's not got the shelby stamp...

https://www.mrbodykit.com/index.php?main_page=product_info&cPath=2_1314&products_id=3702

Sponsored

 

[hinch]

Wonder if it's the Mr Body Kit one but that's not got the shelby stamp...

https://www.mrbodykit.com/index.php?main_page=product_info&cPath=2_1314&products_id=3702

i thought that but the separation between the fangs and the spltter looks different

cent see if you can find out where its from

 

[Manders Mustang]

i thought that but the separation between the fangs and the spltter looks different

cent see if you can find out where its from

Yeah i thought the same the only 3 i remember were Ikon, MBK and MP concepts, however just found a I-5 performance Gt350 as well:

MP:
https://www.americanmuscle.com/mpconcepts-gt350-front-bumper-kit-1517.html
I5:
https://www.i-5autohaus.com/product-page/gt350-style-front-bumper
Ikon:
https://www.ebay.com/itm/Fits-15-17...rsion-Polypropylene-OE-Material-/281996181564
there's also Xenonz who sell the Ikon over here:
https://www.xenonz.co.uk/store/p1138/Front-bumper-conversion-for-Ford-Mustang-2015-2017.html
Anderson:
https://andersoncomposites.com/products/gt-350-style-mustang-fiberglass-front-bumper-with-front-lip

And none have the shelby stamps on.. Therefor, confusing!

 

[hinch]

i'm pretty sure even the clone companies aren't ballsey enough to put an actual shelby logo on a non-official shelby part. we need cent to give us more info is the shelby logo just a sticker ? did they just buy an entire gt350 front clip and do a full swap out I know it was accident repair so if they had to change the internals thats a possibility maybe. so it could be a proper front end not a clone.

 

[Manders Mustang]

i'm pretty sure even the clone companies aren't ballsey enough to put an actual shelby logo on a non-official shelby part. we need cent to give us more info is the shelby logo just a sticker ? did they just buy an entire gt350 front clip and do a full swap out I know it was accident repair so if they had to change the internals thats a possibility maybe. so it could be a proper front end not a clone.

With how much a real one (fenders/hood and brackets) cost, they'd unlikely touch them! They're like 5k usd from a take off car, can imagine genuine parts cost a small tidy sum

 

[hinch]

insurance repair may specify oem parts and the bodyshop managed to squeeze a full gt350 front end in the price and some how manage to ok it .

 

[Manders Mustang]

insurance repair may specify oem parts and the bodyshop managed to squeeze a full gt350 front end in the price and some how manage to ok it .

Unlikely, I did ask tony when it was happening if it was a real front end and he responded "do you think im made of money" haha! I think they covered what oEM cost would be and then worked out the xtra cost and charged tony that.

 

[Kristian87]

Prediction - OEM 350 parts. Tony is crazy enough to do it ;)

Whatever it is, i'm really looking forward to seeing in the metal

 

[Pilgrim/uk]

do the OEM parts fit the bonnet is nearly an inch lower on the 350 so that would need entire front end including bonnet ( I thinks its an inch lower anyway from what I remember lol )

 

[hinch]

do the OEM parts fit the bonnet is nearly an inch lower on the 350 so that would need entire front end including bonnet ( I thinks its an inch lower anyway from what I remember lol )

its an entire new front clip bonnet,wings,bumper supports,inner wings whole lot i priced it up ages ago and to do a full conversion is like £14k in parts alone
I'm really interested in where that bumper + splitter is from as all the replica's usually look off a little but that looks almost real

 

[Centurion07]

Proper stamped spoiler.

 

[hinch]

see the oem splitter probably doesn't fit a replica bumper because the 350 bumper is slightly wider i guess, come on cent tell us how its been done.

 

[Manders Mustang]

see the oem splitter probably doesn't fit a replica bumper because the 350 bumper is slightly wider i guess, come on cent tell us how its been done.

Yeah intrigued as to if this is OEM now...

 

[slowhand99]

Prediction - OEM 350 parts. Tony is crazy enough to do it ;)

Whatever it is, i'm really looking forward to seeing in the metal

This.

 

[v8hgt]

either that or they wrote it off, he imported a white gt350 and did a RHD conversion on it ;)

Sponsored