damn they sound sick!! looks like im ordering. what webpage did you get them from? or did you just email hellion and purchased from themScreamer covers. They make the spool sound way louder and slightly increase spool speed (unconfirmed).
You can hear the difference in Chase's (VRP) video. My car (white car) has screamer covers and his has the standard compressor covers.
How did you fit the strut tower bar on? I see that it's not bolted down... is it just resting on top for show?Just your basic Whipple kit :-)
Does it make a difference to your IAT2 temps?Custom made closed and insulated airbox inlet with Ram air setup.
Huge difference when driving under 30 MPH and at idle. My inlet temps take 15 minutes at idle to rise 10 degrees now compared to 60-70 degrees above ambient before. Sucking in engine heat well just plain sucks.Does it make a difference to your IAT2 temps?
Best engine bay!! Damn. Is it hard to relocate computer and fuses under fender? Benefit?
Looks like there is some sort of spacer between the brace and tower.How did you fit the strut tower bar on? I see that it's not bolted down... is it just resting on top for show?
I made new motor mounts and lowered my engine 1.4 inches. I also have 1/4 inch spacers on the strut tower studs. It has worked excellent. Track days and all, with no issue. This pic was the initial fit up.Just your basic Whipple kit :-)