18 GT glitches

[TnWHTMARE]

As per the manual, mycolor and seat position can be set to a key fob. However, remote start seems to default to last key fob used settings sometimes and then upon hitting the start button will require touching the pre-set manually to set the desired pre-set if you use a different fob then the one that is married to your normal fob.

I have been playing with these settings as my wife is, well a lot shorter than me and these damn seats move sooooooo slow so having the key fobs set to our individual pre-sets makes it way more convenient.

I've not had a chance to glance at the manual but are these settings you are talking about related to mykey or just on an admin key?

Sponsored

 

[vernonator]

I have 2016 GT and have had the seat issue for 2yrs....sometimes it works, sometimes it doesn't...totally random

 

[k4show]

I've had the seat issue on my 2017 as well.

 

[Ace21]

I've not had a chance to glance at the manual but are these settings you are talking about related to mykey or just on an admin key?

I want to say that it can be used in conjunction with mykey, but it can also be used with up to 3 key fobs without mykey enabled.

 

[sed6]

I want to say that it can be used in conjunction with mykey, but it can also be used with up to 3 key fobs without mykey enabled.

You are correct! I failed to follow an important step in the manual, I didn't properly link the seat to my key. Here's the excerpt. Thanks all for the input.

Linking a PreSet Position to your Remote Control or Intelligent Access Key Fob You can save preset memory positions for up to three remote controls or intelligent access (IA) keys. 1. With the ignition on, move the memory positions to the desired positions. 2. Press and hold the desired preset button for about five seconds. A tone sounds after about two seconds. Continue holding until you hear a second tone. 3. Within three seconds, press the lock button on the remote control you are linking. To unlink a remote control, follow the same procedure – except in step 3, press the unlock button on the remote control. Note:If more than one linked remote control or intelligent access key is in range, the memory function moves to the settings of the first key to initiate a memory recall. Easy Entry and Exit Feature If you enable the easy entry and exit feature, it automatically moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off. The driver seat returns to the previous position when you switch the ignition on. You can enable or disable this feature through the information display. See Information Displays (page 88).

 

[saltydogg]

Anyone else have an issue with the trunk release over the license plate? I’ve had mine act unresponsive a few times. Had to use the button on the key fob.

 

[hawkbox]

Another random issue - half the time when i put the car in sport mode - it is in sport steering - then randomly sometimes it starts in normal, then other times it is in sport steering again. Non magnaride here so that isnt a factor.... anyone else notice this? Random steering mode?

Sponsored