Notes
Moustang
Does anyone knows if the MP Concepts Gloss Black Replacement Decklid Panel is a replica of the Ford racing OEM deck-lit that was available for the 15-17? Or is the shape a bit different? Thx
Sponsored
It looks the same. Just a blank decklid. I received the mp concepts one a few weeks ago and sent it back.You can put surface scratches in the gloss just by rubbing your finger on it. Swirl city after a few washesDoes anyone knows if the MP Concepts Gloss Black Replacement Decklid Panel is a replica of the Ford racing OEM deck-lit that was available for the 15-17? Or is the shape a bit different? Thx
So just like the stock one in my experience!It looks the same. Just a blank decklid. I received the mp concepts one a few weeks ago and sent it back.You can put surface scratches in the gloss just by rubbing your finger on it. Swirl city after a few washes
Thanks!It looks the same. Just a blank decklid. I received the mp concepts one a few weeks ago and sent it back.You can put surface scratches in the gloss just by rubbing your finger on it. Swirl city after a few washes
If they are the same sensitivity I'm alright with it, if worse Ill have to go with the 18 version that I'm not very fond off for a 15.So just like the stock one in my experience!
Good idea for the wrap, you mean something like a 3M or Expell?Ordered one this weekend along with a track pack spoiler.
I'm thinking of having them both clear-wrapped to prevent scratches like on all other Ford black trim.
If you are not in a hurry give them some time or better yet contact them directly. I'm in the same boat I just took delivery yesterday. I want to do all kinds of things to my car. I'm waiting for Roush to release their new CAI for the car. I know there are some already out there but the Roush unit looks the best and can be used either way.Went to the site. Can’t get past the home page . Says it’s under construction.
Did you use the '15-'17 Redline hood struts on the '18? I've been wanting to get hood struts for my '18 GT and I've been hesitant to order any because either product descriptions don't list '18 in their fitment list, or companies that I contact cannot confirm that they fit. I had Redlines on my '15 S550 and would have kept them if I knew they would fit. Figured with the hood looking different, they wouldn't fit.I have already installed BMR Jacking Rails, JLT Oil Separator, Red Line Hood Struts and Steeda Clutch Spring.
Yes! The Hood Struts fit like a glove. I was not sure they would fit the 2018. Mine are from my 2015 GT and are Red Line. I just cleaned them up and wiped the shafts down with a light coat of silicone. I believe because the hood seems a little larger and a tad heavier the hood does not snap up to full engagement as quickly as the 2015 but they hold firmly and close completely. I'm very careful as far as installs go so I preceded slowly and made sure everything fit and cleared. It's great not having to buy new stuff and being able to use what you already have.Did you use the '15-'17 Redline hood struts on the '18? I've been wanting to get hood struts for my '18 GT and I've been hesitant to order any because either product descriptions don't list '18 in their fitment list, or companies that I contact cannot confirm that they fit. I had Redlines on my '15 S550 and would have kept them if I knew they would fit. Figured with the hood looking different, they wouldn't fit.
Along the same note, does anyone know if the rear deck is the same on the '18 as the 15-17's? I want to order the Roush spoiler but they cannot confirm that it fits on the 2018's. Thanks!
Do you have any more pictures? Trying to decide if I want to make the switch.The ford racing ‘18 decklid is a very nice piece that is packaged well and looks pretty clean once installed.
I can snap a few pics later today, but it’s a big improvement over the stock decklid and looks much cleaner imo.Do you have any more pictures? Trying to decide if I want to make the switch.
These emblems are double sided tape. No holes to drill just careful placement.Thanks!
I just watched some install video's and I think I'm gonna skip the MP concepts one.
If they are the same sensitivity I'm alright with it, if worse Ill have to go with the 18 version that I'm not very fond off for a 15.
Good idea for the wrap, you mean something like a 3M or Expell?
Maybe someone know if this Ford performance logo is glued or 3M'd on it or does it have holes & tabs? Thx