TexasRebel
Gearshifter
- Joined
- Mar 19, 2016
- Threads
- 27
- Messages
- 2,500
- Reaction score
- 836
- Location
- between the mustard and the mayo
- Vehicle(s)
- 2016 YZ GTPP - PP2
hmm... the US cars do.Oh, I didn't realize Sync3 didn't have Sirius.
Sponsored
hmm... the US cars do.Oh, I didn't realize Sync3 didn't have Sirius.
Line lock is disabled on all ecoboost on earthHello everyone, ok so I have the forscan up and running. All reading as expected. I'm now trying to find a current listing of modifying codes for the Ecoboost. Specifically, the line lock that is turned off here in Australia. I would like to turn it back on. ;) If there is a link to the current codes please let me know. I would like to change a few other bits.
Ford does not do OTA updates, at least not on Sync2If you do changes to your Sync system, what happens the next time the system receives an update from Ford? Say you add Navi. Will that get erased when Ford does an OTA?
Refill the car with oil???Anyone knows how to turn off oil pressure lamp in the cluster?
I'm asking because I got a reason, I'm one of the guys who installed PP gauges on a base model.Refill the car with oil???
I can't give you any details but I recall recently stumbling on a thread about how "easy" it was to enable line lock on an EB. I believe it was a guy who did a Coyote swap into his EB and he turned it on. Unfortunately, I think I recall him saying that he had to take it to the dealer and pay like $300 for them to turn it on. Do a search for his thread. It was something like "Line Lock Easy as 1 2 3" or something like that.Hello everyone, ok so I have the forscan up and running. All reading as expected. I'm now trying to find a current listing of modifying codes for the Ecoboost. Specifically, the line lock that is turned off here in Australia. I would like to turn it back on. ;) If there is a link to the current codes please let me know. I would like to change a few other bits.
Figured since it's been close to 3 months since I asked this - and people have done a good bit more research on the available codes - I'd ask this again.Has anyone seen anything relating to speed/MPH for convertible top operation? I'd love to be able to operate the mechanism at 5-8MPH vs. none, it's super handy when you're rolling up to a redliight to be able to start it moving.
In my S2K, there was two safety mechanisms, 1) speed and 2) e-brake set, and 1 was easily bypassed with a little wiring change, so then you could just engage the brake up a couple of ticks and raise/lower.
Verts get a DIC message, so I thought the logic might be available module config/BCM data.
You should probably make this it's own thread. This is a thread for ForScan and AS-BUILT mods, not sync updates. No one is going to see this update in here.Sync 3 Owners with Navigation... enjoy!
http://www.mustang6g.com/forums/showthread.php?p=1633764#post1633764