My Whipple Results

[Livnpaintball2]

Today I made it to the Dyno to check the car and see what's going on, 95* 50% humidity I put down 640/500. I'm happy with that, stg2 whipple and an X pipe. This is the good shit! After I get bored with 640 then I will try a smaller pulley?

Sponsored

 

[Foxracing19931]

Today I made it to the Dyno to check the car and see what's going on, 95* 50% humidity I put down 640/500. I'm happy with that, stg2 whipple and an X pipe. This is the good shit! After I get bored with 640 then I will try a smaller pulley?

Nice! Should see 30hp and 30tq increase with pulley change

 

[FIVE_LITER]

Nice, are you running the 3.750 pulley currently?

 

[Livnpaintball2]

3.75 pulley, wonder what it would do on E85? Wish we could switch out tunes on the fly like I could on my BMW.

 

[Phoenix]

what psi and what timing? 93 or 91?

 

[Livnpaintball2]

Stock settings in flight control. 93 Octane

 

[Phoenix]

Stock settings in flight control. 93 Octane

What PSI and timing? No logs?

 

[LethalPerformance]

Awesome numbers! Congrats on the Whipple setup.

 

[Livnpaintball2]

What PSI and timing? No logs?

11psi, timing is whatever whipple set it at in there tune. As far as I know you can not log with flight control.

 

[beefcake]

Very nice, e85 should get you 750 easily. We have some killer deals on the level one set ups

 

[GSLSE20B]

:lol:

Stock settings in flight control. 93 Octane

Whipple calibration will add more timing , run some MS109 and you will be pleasantly surprised .

 

[Performance nut]

I absolutely love the Whipple torque "curve". This is the Whipple tune?

 

[RockStang]

Damn so you're on the 3.75 and seeing 11psi? I'm barely at 11 with the 3.625

 

[jvandy50]

how much do you smile when you push the go pedal?

 

[Foxracing19931]

Damn so you're on the 3.75 and seeing 11psi? I'm barely at 11 with the 3.625

Yeah I'd say 10 psi cause I do right around 11 with 3.625 pulley also

Sponsored